The IoT gateway HLR-GW aggregates data from each LoRa wireless device and enables data collection and monitoring by connecting to a local PC connected via Ethernet or to a PC via a hub using an existing LAN communication network (Web server and monitoring software are included as standard).

Data is stored sequentially in CSV format within the IoT gateway, and can be extracted at any time using a connected PC. Data can also be retrieved at any time using a USB memory stick without connecting a PC (included as standard).

In addition, if you configure higher-level software, it is also possible to acquire data using the FTP method.

When the analog signal exceeds the upper or lower alarm limit, or the contact signal exceeds the upper alarm limit, an alarm is displayed on the PC screen (standard), an email is sent (standard), or contact output is sent to a lamp or buzzer from the IoT gateway (optional).

For wireless communication, we use LoRa (*), a wireless technology for IoT. This allows communication up to 5km in line of sight to the parent IoT gateway HLR-GW, so wireless communication can reach places where conventional 920MHz band specific low-power wireless could not reach without placing a repeater, and has been well received by customers.
*This device will be used with LoRa Private.