KOGANEI CORPORATION
Koganei CS2F, 3F, 4F, 5F Reed Switch Type Sensor Switch
Manufacturer: KOGANEI CORPORATION
Specifications
| Item | Model | CS2F | CS3F | CS4F | CS5F |
|---|---|---|---|---|---|
| Wiring type | 2-lead wire | ||||
| Load voltage | AC85～230V (r.m.s.) | DC5～30V | DC5～30V | DC3～30V | |
| Load current | 2～200mA | 10～46mANote 1 | 5～25mANote 1 | 0.1～80mA | |
| Internal voltage dropNote 2 | 0.1V MAX. (At 200mA load current) | 3V MAX. (At 46mA load current) | 2.8V MAX. (At 46mA load current) | 0.1V MAX. (At 80mA load current) | |
| Leakage current | 0mA | ||||
| Response time | 1.2ms MAX. | ||||
| Insulation resistance | 100MΩ MIN. (At DC500V Megger, between case and lead wire end) | ||||
| Dielectric strength | AC500V (50/60Hz) in 1 minute (Between case and lead wire end) | ||||
| Shock resistanceNote 3 | 294.2m/s² [30G] (Non-repeated shock) | ||||
| Vibration resistanceNote 3 | 88.3m/s² [9G] (Total amplitude 1.5mm [0.06in.], 10～55Hz), Resonance frequency 5000±400Hz | ||||
| Environmental protection | IP67 (IEC standard), JIS C0920 (Water-proof type) | ||||
| Operation indicator | When ON: Red neon lamp turns off | When ON: Red LED indicator lights up | |||
| Method of wiring | With DIN connector (Cabtyre outer diameter φ6.5 [0.256in.] MAX., Wire φ1.25SQ MAX.) | ||||
| Ambient temperature | 0～60°C [32～140°F] | ||||
| Storage temperature range | -10～70°C [14～158°F] | ||||
| Contact protection | Not required | ||||
| Mass | 40g [1.41oz.] | ||||
