Fuji Ceramics Co.
Fuji Ceramics MC-30 Simple Sensitivity Calibrator

Manufacturer: Fuji Ceramics Co., Ltd.
Model: MC-30
Features
- The “MC-30” simple sensitivity calibrator is an integrated device that combines an exciter, amplifier, and display, allowing sensor sensitivity to be read directly on the unit.
- It enables quick confirmation of sensor operation before vibration analysis and allows on-site calibration of acceleration sensors for equipment diagnosis.
- The vibrator, amplifier, and display are integrated into a single unit, providing direct digital display of sensor sensitivity.
- It is compatible with both charge output type acceleration sensors and built-in amplifier acceleration sensors.
- The drive voltage can be selected from DC 24 V or DC 15 V, and the drive current can be selected from 2.0 mA or 4.0 mA.
- Up to 100 data points can be stored in the MC-30 main unit, with operation and data transfer available via a PC.
- The device supports approximately 10 hours of continuous operation.
- It is supplied with a convenient hard case for easy transport.
Specifications
| PE / IEPE calibration accuracy | Sensitivity 0.101~19.9pc/(m/s²) or mv/(m/s²): ± (3%+1digit) Sensitivity 0.026~0.100pc/(m/s²) or mv/(m/s²): ± (10%+1digit) |
| Calibration mode | Single/ Repeat |
| Accuracy measure to DC bias voltage | ≤±1V |
| Exciter vibration acceleration | 10m/s²(rms)±3% |
| Exciter vibration frequency | 159.2Hz±1% |
| Harmonic distortion | ≤3% |
| Calibratable sensor weight | ≤100g |
| Alarm over weight | Indicates [OVER] and Exciter is stop |
| Power supply for IEPE accelerometers | Voltage DC24V/DC15V 2.0mA/4.0mA |
| Power requirement | AC adapter or 4 AA batteries Continuous work is approx. 10 hours by LR6 batteries. |
| LR6 batteries alarm lamp | ≤4.25V±0.1V |
| Operating temperature range | +10°C~+40°C |
| Storage temperature range | -10°C~+50°C |
| Storage humidity range | ≤90% |
| Internal data memory | 100 data max. |
| Auto power off (on/off) | approx. 3 minutes |
| Display backlight | Hi/Lo *With automatic light-off function |
| Sensor mount space | φ20mm, M6 female (depth 6.5mm) |
| Dimensions | 120(W)×140(D)×50(H)mm |
| Weight | approx. 1kg |
◆ Example of Calibrator in use

Directly input the sensor output, and check the sensitivity.

Use the exciter only, and calibrate the vibration measuring system.
Related Products
-

Fuji Ceramics FUS Series Low Frequency Type Airborne Ultrasonic Sensor
-

Fuji Ceramics C-25 Hard PZT Material
-

Fuji Ceramics FUC01A Ultrasonic Cutter
-

Fuji Ceramics FUS Series High Frequency Type Airborne Ultrasonic Sensor
-

Fuji Ceramics V Series Piezoelectric Film
-

Fuji Ceramics FKS-111 Ultra-high Sensitivity Air Pressure Sensor






