Venn Co.
Venn RP-9 type pressure reducing valve for steam
Manufacturer: Venn Co., Ltd.
Model: RP-9 type
Features
- This is a pilot-type pressure reducing valve for high-pressure steam.
- It reduces steam pressure safely and reliably.
- In addition, it supports a maximum pressure reduction ratio of 20:1.
- As a result, it operates stably even at high pressure differences.
- Moreover, the face-to-face dimensions match the former RP-2H pressure reducing valve.
- At the same time, the weight is reduced by about 40%.
Specifications
| Product code | RP9-L | RP9-M |
|---|---|---|
| type | Made of ductile cast iron | |
| Nominal diameter | 15-150 (1/2-6) | |
| Applicable fluid | steam | |
| Fluid temperature | 220 ° C or less | |
| Primary side applied pressure | 2.0MPa or less | |
| Secondary adjustment pressure range | 0.03 ~ 0.8MPa | |
| Maximum decompression ratio | 20: 1 | |
| Minimum differential pressure before and after the valve | Nominal diameter 15 ~ 80: 0.05MPa, Nominal diameter 100 ~ 150: 0.07MPa | |
| Deadline boost | 0.02MPa or less | |
| offset | Within 0.02MPa (Secondary adjustment pressure 0.03 to 0.035MPa) Within 0.03MPa (Secondary adjustment pressure over 0.035 0.07MPa) Within 0.05MPa (Secondary adjustment pressure over 0.07 0.8MPa) | |
| Allowable leakage amount | 0.05% or less of the rated flow rate | |
| End connection | JIS 20K RF flange | |
| Material body | FCD | |
| Material Valve body | SUS | |
| Material Valve seat | SUS | |
| Material Piston / Cylinder | CAC406 | SUS |
| Handle or cap color | Silver | Green |
| Mounting posture | Upright mounting on horizontal piping | |
Related Products
-
VENN RP-70 type pressure reducing valve for steam
-
Venn RP-6 type pressure reducing valve (for steam)
-
Venn RP-8 type pressure reducing valve for steam
-
Venn RP-6P type pressure reducing valve for steam
-
Venn RP-6K type pressure reducing valve for steam, remote control type
-
Venn RP-6BD type Pressure reducing valve with built-in trap (for steam)
