- A swing-type check valve is built into the drain inlet.
- As a result, there is no need to install a separate check valve on the inlet piping.
- In addition, the trap operates stably regardless of the amount of condensate generated.
- This applies to the AFP1H type.
- Moreover, the simple structure uses the force of a float and spring.
- Therefore, pressure applies reliably and exhaust switching is stable.
- Furthermore, all mechanisms and piping connections integrate into the main unit.
- As a result, maintenance can perform while the unit remains connected to the piping.
- Finally, all internal parts make of stainless steel for durability and corrosion resistance.
Specifications
| Product Symbol | AFP1H-M |
|---|---|
| Types of valves | Pumping traps |
| Nominal diameter | 25（1） |
| Applicable fluids | Steam & Drain |
| Fluid temperature | Below 160°C |
| Application pressure | Less than 0.5MPa |
| Maximum continuous discharge | 2500L/h |
| End connection | JIS RC1 Screw |
| pressurized fluid | Steam or air |
| pressurized fluid pressure | 0.03～0.5MPa |
| Back pressure tolerance | For pressurized fluid steam: pressurized fluid pressure × 50% or less For pressurized fluid air: pressurized fluid pressure × 80% or less |
| Mounting Position | Upright mounting on horizontal piping |
| Others | Inlet side check valve (built-in body, swing type), built-in pressure hole strainer (80 mesh) |
| Material: Body | FCD |
| Material: Valve body | SUS |
| Material: Valve seat | SUS |
| Material: Float Case | SUS |
| Material: Lid | FCD |
