Japan, Yokohama
Yokohama Adguard PC-1 Labor-Saving Single Component Epoxy Resin Adhesive
Product Made in Japan
Manufacturer: Yokohama
Model: Adguard PC-1
Adguard PC-1 is a moisture-curing single component structural adhesive that cures with moisture in concrete or air. Since it does not require mixing, it is an eco-friendly epoxy resin with excellent workability, helps reduced time and cost.
Feature
● It is not necessary to mix the base compound and curing agent.
● Stable performance.
● Since it generates little heat and has a long pot life, it is effective for work on large areas.
● Spraying is possible and there is almost no sagging.
● It is not necessary to wash the coating device with the solvent after using it.
● Almost no irritating odor.
● By using Adguard PC-1, you can reduce industrial waste (waste cans and cleaning solvents).
Use
Adguard PC-1 can be used for concrete structure (roads, bridges, railways, etc.)
Properties
| Quality items | Quality standard * | Numerical value | Remark | ||
| PC-1 *2 | PC-1H *3 | ||||
| Appearance | – | Light gray paste | Light gray paste | PC-1 30±2℃PC-1H 10±2℃ | |
| Viscosity | (MPa·s) | 10 4 ~ 15 x 10 4 *1 | 11 x 10 4 | 12 x 10 4 | |
| {cP} | {10 4 to 15×10 4*1 } | {11×10 4 } | {12 × 10 4 } | ||
| Pot life (hours) | 2 hours or more | 3 hours | 6 hours | ||
| Minimum thickness (mm) | 0.3 or more | 0.8 | 0.8 | ||
*: Quality Standards: Concrete Standard Specification Document JSCE Standards
*1: Epoxy resin adhesive for precast concrete (for bridge girders) Based on quality standards.
*2: PC-1 standard type
*3: PC^1H fast curing type
Physical properties
| Quality items | Quality standard * | Numerical value | Remark | |
| PC-1 *2 | PC-1H *3 | |||
| Specific gravity | 1.1 ~ 1.7 | 1.6 | 1.6 | 20±2℃×1 day + 60±2℃×3 days |
| Tensile strength N/mm² | 12.5 or more | 17.0 | 18.0 | |
| Compressive strength N/mm² | 60.0 or more *1 | 75.5 | 78.0 | |
| Tensile shear bond strength N/mm² | 12.5 or more | 14.0 | 14.0 | |
| Adhesive strength *2 N/mm² | 6.0 or higher | 7.0 | 7.0 | 20±2℃×7 days |
*: Quality Standards: Concrete Standard Specification Document JSCE Standards
*1: Epoxy resin adhesive for precast concrete (for bridge girders) Based on quality standards.
*2: 4-point bending test
<Caution>
- This adhesive satisfies the quality standards for its properties and physical properties.
- However, the values shown are measurement examples and are not guaranteed values.
Packing
7kg/can (2 cans per box)
*Please order by box when ordering.
Related Products
-
Line Seiki TC-6000 Infrared Thermometer (Measuring Instruments)
-
Sekisui Chemical Eccentric YARITORI Fitting
-
Fukuda EC042B–2 EC042B Series DC Motors
-
NAGANO KEIKI KM70 Pressure Transmitter for Construction
-
TERAOKA SEISAKUSHO 6371 0.06 HF For Shade Polyester Film Adhesive Tape
-
Sanritsu Electric JA300 A Cable Joint That Pursues Functionality And Safety
