ENDO KOGYO, Japan, Lifting
ENDO KOGYO ER Series Torque Reel

Products Made in Japan
Manufacturer: ENDO KOGYO
Model: ER Series
Feature of ER series
This reel is small and light, but it can stretch up to 4m.
It uses a round drum. So, as you pull the wire, the force grows slowly.
This shape also ensures the wire doesn’t get stuck, even if pulled at an angle.
Once you reach the set height, the wire goes back in.
Some versions, like ER-3A, 5A, and 10A, have a feature.
You can stop them anytime you pull.

Specifications
| Model | Maximum initial tension (Winding tension) N[kgf] | Winding length (m) | Additional tension (caused by pulling out the wire rope) N[kgf] | Effective number of spring turns | Ratchet | Wire rope diameter (Φmm) | Mass (kg) |
| ER-3A | 18[1.8] | 3.0 | 12[1.2] | Approx.16 | ● | 2.38 | 1.4 |
| ER-3B | 18[1.8] | 3.0 | 12[1.2] | Approx.16 | – | 2.38 | 1.3 |
| ER-5A | 25[2.5] | 3.0 | 25[2.5] | Approx.13 | ● | 2.38 | 1.5 |
| ER-5B | 25[2.5] | 3.0 | 25[2.5] | Approx.13 | – | 2.38 | 1.4 |
| ER-10A | 49[5.0] | 4.0 | 49[5.0] | Approx.13 | ● | 2.38 | 4.5 |
| ER-10B | 49[5.0] | 4.0 | 49[5.0] | Approx.13 | – | 2.38 | 3.8 |
Related Products
-

UHT Corporation New soft lap φ30 #240
-

Chiyoda Tsusho 4/6/8/10/12R-OOY FUJI Y CONNECTOR [RESIN BODY]
-

Nakatani Kikai NAS5C Chipping Designated Angle Grinder (Diamond Cutter, 5 Inch Type)
-

Kitz AKTAFM Type 600 Brass Ball Valves (Full Bore)
-

SANKO TITAN HL-RW Rope double lanyard
-

Matsumoto Kikai SLM-200 ~ 1200 Sliderman





