Sakaguchi MPI Type Samicon Polyimide Heater

Manufacturer: Sakaguchi Electric Heaters CO., LTD.
Model: MPI Type

Features

The heater can be used up to 200°C due to the use of a special polyimide film with high heat resistance in the insulation material that retains the heat ray.
Uniform temperature distribution-The foil-shaped heating rays are evenly distributed on the heater surface, and the heating area occupies a large part of the heater surface area, resulting in less uneven heating and high thermal efficiency.
Environmentally friendly- By developing a manufacturing method for a terminal structure that takes advantage of the characteristics of thin heaters, the connection between the lead wire and the terminal part is not a soldering method, but a lead-less ecological heater, making it an environmentally friendly ecological heater.
Since no adhesive is used to bond the low-outgassing- insulation, the heater produces very little outgassing. In addition, siloxane gas is not generated, so it can be used in environments where its generation is disliked.
Fast temperature rise response- The heater has a particularly fast temperature rise response due to the very thin insulation thickness of less than 0.2 mm and the small heat capacity.
Wide range of circuit designs- Precise etching allows for changes in circuit distribution and shape, allowing for the design of heat distribution according to the application.

A(mm)	B(mm)	C(mm)	Voltage (V)	Capacity (W)	Product Code
25.4	25.4	200	28	5	MPI-11
25.4	50.8	200	28	10	MPI-12
25.4	76.2	200	28	15	MPI-13

Heater surface temperature	Regular 200°C (This is only a guideline, and the temperature at which it can be used will vary depending on the actual usage environment)
Power Density	(1) When hung in still air: 1.0 w/cm² max (2) When in close contact with a heated object: 1.5 w/cm² max
Insulation resistance	Over 100 MΩ at 500 V DC mega
Thickness	0.2 mm or less (excluding lead connections)