CCS PD4-6024-2-E-NC Digital Control Units

Manufacturer: CCS Inc.
Model: PD4-6024-2-E-NC

Features

The PD4-6024-2-E-NC digital control unit can connect 24V input LED lighting with a total power consumption of up to 60W.
This control unit operates on an AC100-240V. External control protocol is Ethernet communication and PLCCOM communication.
Measures 180mm x 95mm x 106mm (width x depth x height).

Specification

Applicable Light Unit (output ratings)	24V DC Light Units, total for all connectors: 60 W max. (SMP-03V-BC: 60 W max. per connector)
Number of channels	2 channels
Drive method	Constant lighting
Lighting method	Continuous / Strobe lighting (no overdrive)
Intensity control method	Continuous lighting: PWM control / Strobe lighting: PWM control and lighting time control
Light intensity setting	Select from 1,024 levels and 256 levels
PWM frequency	125 kHz
Input power	100 to 240 VAC (+10% -10%)
Power consumption	152 VA
Inrush current	27 A (at 100 VAC), 63 A (at 240 VAC) from a cold start
External control method	Ethernet communication, PLCCOM communication, USB communication
Over current protection	Yes
Overvoltage category	Category II
Output connector	SMP-03V-BC x 2
Conformed standards	CE, UKCA, RoHS compliant
Trigger input voltage	5 – 24 V
Operating temperature and humidity	Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity	Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method	Natural air cooling
Weight	1.5 kg max.
Material, coating, and surface finish	Steel sheet, black (leather satin)
Accessories	Hardware manual x 1 Power Terminal Block Cover x 1 M4 screws for the cover x 2 Trigger Terminal Block^1 x 1 1 Wires for trigger are not included. Please prepare them separately. Applicable power wires: AWG 26 to 16 (0.13 to 1.31 mm²), length: within 3 m, bare end: 8 mm (Ferrule can be used)
Program	[Sample Program] Sample programs are available. See the Software Tools tab.