Suntest CS Series Rod Type Switching Sensor Without Mechanical Contact

Manufacturer: Suntest Co.,Ltd
Model: CS Series

CS series is a switching sensor adopting magneto-inductive principle without mechanical contact. Combined with CSC controller, forward/backward limit points are output; furthermore the both points can be individually adjusted by trimmer integrated in the controller. As a sensor rod is completely sealed, the sensor can be installed inside hydraulic/pneumatic cylinders. Integrated coils inside sensor rod detect locations of movable magnet utilizing a change of inductance according to magneto-inductive principle. Since CS series has no mechanical contact as seen in coventional lead switches and also has no mechanical wear-out, a long life and reliability can be expected. Moreover the remote adjustment for detecting points is possible because switching points can be changed by trimmer in the controller.

Specifications

Effective stroke	15-1000mm*
Adjustable range of output	±6mm(forward) / ±10mm(backward)
sensor	±5μm/°C
controller	±20μm/°C
open collector(standard)	30V 0.1A
relay output(optional)	rated load AC250V 2A / DC30V 2A 1a contact
Carrier frequency	10kHz
Power supply	DC24V 0.1A
Max pressure	35MPa(sensor rod)
Operating temp	−40〜100°C(sensor) / 0〜60°C(controller)
Vibration	6G(40Hz 2mmp-p)
Shock	100G(2msec)
Protection	IP67(10kPa, 30min)(sensor)
Cable	1m standard(Max10m)

*Arbitrary effective length between 15 and 1000mm is possible. As to an effective length shorter than 15mm and other length than 30mm(backward)/40m(foreward), consult factory.
*CS series can be also used as a liquid level detecting switch…consult factory.

Model No.

Sensor
CS – Effective stroke (mm)15, 30, 50, 75, 100, 300, 500, 700, 1000 – Cable length (m), Std 1m, Max 10m
Controller
CSC – Effective stroke(mm) – Output Nil: open collector, R: relay