Sakae Tsushin Kogyo
Sakae HSM22 Hall effect IC
Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: HSM22
General Specifications
| Item | Specification |
|---|---|
| Current Consumption | Single output: Max. 16mA Dual output: Max. 32mA |
| Independent Linearity Tolerance | ±0.5%FS (FS = 360°) |
| Mechanical Rotating Angle | 360° (Endless) |
| Electrical Angle | 360° |
| Applied Voltage | 5V ±10% D.C. |
| Load Resistance | 10kΩ min |
| Effective Output | 10% ±3% Vin ~ 90% ±3% Vin |
| Output Temperature Characteristics | Within ±0.3% Vout/FS |
| Operating Temperature Range | −40°C ~ +105°C |
| Storage Temperature Range | −40°C ~ +105°C |
| Mass | Approx. 20g |
| Rotating Torque | Within 5mN·m (within 50gf·cm) |
Environmental Specifications
| Item | Specification |
|---|---|
| Thermal Shock | 5 cycles −40°C ↔ +105°C |
| Exposure at Low Temperature | 24 hours at −40°C |
| Exposure at High Temperature | 1,000 hours at +105°C |
| Vibration | 10 to 2,000Hz, 196m/s², 12 hours |
| Shock | 980m/s², 6ms (18 times) |
| Rotational Life Expectancy | Approx. 50,000,000 shaft revolutions |
| EMS Tolerance | 100V/m (80MHz ~ 1GHz, 1kHz Sine wave, 80% Amplitude Modulation) |
| ESD Tolerance | ±8kV contact discharge ±15kV air discharge (Based on IEC 61000-4-2) |
Output Characteristics
Terminal Connection Diagram
Special Specifications Available
| Category | Description |
|---|---|
| Effective Electrical Angle | 90°, 180°, 270°, or arbitrary angles |
| Shaft Machining | Special machining on the shaft |
| Output Configuration | Cross output, Parallel output, Dual independent output |
| Applied Voltage Option | 12V / 24V |
| PWM Output | Available |
| Low Current Consumption Mode | Within 11mA |
Note: Rotational life expectancy may differ from the specification depending on operating conditions.
REQUEST QUOTATION
PAYMENT
LINK
