MITSUHASHI CORPORATION
MITSUHASHI PAM-10 Analog Input Module
Manufacturer: MITSUHASHI CORPORATION
Model: PAM-10
This is an analog input module for the G-series. It is used when using sensors other than those manufactured by our company for meander control.
Drawing
① Peripheral device connection connector
② Terminal block
③ Channel selection switch *1: Mounting hole (allowable screw-in length 4mm) *2: Mounting pitch *3: DIN rail mounting plate (sold separately) DRA-2, Takachi Electric Compatible DIN rail width 35mm *4: Minimum bending radius *5: Cable length *6: Cable outlet Allowable cable diameter φ6
Features
- It can be mounted on a DIN rail using the specified parts.
- It can be connected to sensors equipped with analog outputs such as 1-5V, 0-5V, and 0-10V.
Specification
| Power (V+) | DC24V±20% (supplied via CAN bus) |
|---|---|
| Current consumption | Maximum 100mA (when sensor service power supply is not in use) |
| For sensors Service power supply | V+ – 1.0V to V+, up to 300mA |
| Power supply for potentiometers | DC 10.0V ± 0.3V (Allowable load 5kΩ or more) |
| mass | 150g (including included cable) |
| Usage environment | Temperature: 0-40°C, Humidity: 80% Rh or less (non-condensing) |
| Effective input range | 0.3V to 9.7V |
| accuracy | 0.2% of full scale |
| Input impedance | 1MΩ or more |
| Sampling period | 1.5ms or less |
| resolution | 1mV |
| Temperature Drift | 0.01%/℃ of full scale |
Related Products
REQUEST QUOTATION
PAYMENT
LINK
