Manufacturer: Thomas Scientific Instruments Co., Ltd.
Model: T-104NC

• Boiling test compliant, constant temperature water bath capable of heating up to 99.9°C, equipped with a high-temperature, heat-resistant stainless steel heater as standard.
• High temperature stability with PID control
• Equipped with various safety functions such as overheat and low water level alarms.
• Selectable timer function with auto-stop and auto-start
  (maximum 99 hours 59 minutes)

Usage example

It can be used for various water and heat resistance tests (for resins, paints, etc.), wood adhesion strength tests including boiling peel tests and repeated boiling tests.

Specification

External dimensions	W860×D550×H(Water tank 530 + Agitator 150)mm
Internal dimensions of the tank	W610×D450×H420mm
Effective dimensions inside the tank	W500×D430×H360mm
Capacity (L)	100
Temperature range (°C)	Room temperature +5℃ 99.9℃ *At temperatures above 80°C, the temperature may not rise unless the lid is closed, depending on the conditions.
temperature stability	±0.05℃ (at 50℃)
temperature control	Digital temperature indicator and controller, PID control system
timer	1 minute to 99 hours 59 minutes: Auto start timer or auto stop timer
heater	Sheath type 4kW (2kW x 2)
Agitator	Vertical propeller agitation system, 90W motor
safety equipment	Leakage circuit breaker, tank temperature overheating prevention device, self-diagnostic function (tank temperature overheating prevention, heater wire breakage, water level drop, temperature sensor malfunction, triac short circuit)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of height-adjustable stainless steel shelves, one stainless steel lid.
power supply	AC200V single phase 21A 50/60Hz, 3m cord without plug, power supply capacity 30A or more.
others	Drain opening outer diameter Φ16mm
weight	70kg

Illustrations