TECHNOPLAN CMB-F Series Magnetic Base

TECHNOPLAN

Manufacturer: TECHNOPLAN
Model: CMB-F series

Flexible Type

CMB Magnetic Base

<Applications>

Can be used as a measuring instrument holder in the same way as the standard type, and can also be used for applications such as holding sensors in a fixed position.

<Features>

Locking and unlocking can be performed simply by tightening or loosening the dial.
When the lock is released, it loosens gradually from the upper section, preventing the tip from suddenly dropping.
The arm section of the CMB-FX is a flexible type that can be bent freely.
All models except the CMB-FSP are equipped with a fine adjustment function at the tip.

With Fine Adjustment Function

CMB-FL	CMB-FMA	CMB-FX	CMB-FD


CMB-FP	CMB-FMV	CMB-FS	CMB-FSP

Dimensional Drawing

■ Flexible Type

Model	Mechanism	Base Dimensions (mm)						Arm Dimensions (mm)					Dial Gauge Mounting Section (mm)		Weight (kg)
Model	Mechanism	Width	Length	Height	Applicable Base	Mounting Screw Hole	Holding Force (N)	L1	L2	L3	Total Length	Mounting Section	Hole Diameter	Dovetail Groove	Weight (kg)
CMB-FL	Mechanical Lock Type	50	73	55	CMB-HR	M8 × 1.25	900 (100 kgf)	220	172	79	478	M8 × 1.25	φ8 (with φ6 Adapter)	6.5	2.3
CMB-FMA	Mechanical Lock Type		58		CMB-HB		784 (80 kgf)	159	110	72	348				2.0
CMB-FX	Flexible Type		58		CMB-HB		784 (80 kgf)	φ16 × 300			350				1.3
CMB-FD	Mechanical Lock Type		40		Dedicated Base		392 (40 kgf)	73	50	58	180				0.9
CMB-FP		30	30	30	CMB-HP	M5 × 0.8	167 (17 kgf)	73				M5 × 0.8			0.4
CMB-FMV		30	35	35	CMB-HM		294 (30 kgf)	71							0.45
CMB-FS		φ28 × 31			Dedicated Holder		98 (10 kgf)	27	—	69	96				0.23
CMB-FSP		φ30 × 25			Dedicated Holder		196 (20 kgf)	—	—	—	55		φ6	5.5	0.18

※ The holding force values are based on SS400 steel, 10 mm plate thickness, and a ground-finished surface.
※ 9.8 N = 1 kgf.
※ The base sections of the CMB-FS and CMB-FSP do not have an ON/OFF function.
※ The CMB-FSP does not have a fine adjustment function at the gauge mounting section.
※ The dial gauge mounting section of the CMB-FSP can accommodate the Pic Test PC-1A.