TECHNOPLAN
TECHNOPLAN CPH-C Series Magnet Cleaner
Manufacturer: TECHNOPLAN
Model: CPH-C series
Magnet Cleaner
CPH-C Magnet Cleaner
<Applications>
- Removes metal chips produced after drilling or tapping, as well as iron particles and fragments from inside holes.
<Features>
- Collects small parts magnetically from narrow spaces that are difficult to reach by hand.
 |  |  |
| CPH-CA | CPH-C510 | CPH-C1015 |
| Model | Dimensions (mm) | Holding Force (N) | Mechanism | Weight (g) | |
|---|---|---|---|---|---|
| Magnetic Pole Section Dimensions | Overall Length | ||||
| CPH-CA | φ8 | 144–745 | 10 (1 kgf) | Antenna Type | 31 |
| CPH-C510 | φ5 × 25 / φ10 × 18 | 500 | 8 (0.8 kgf) / 8 (0.8 kgf) | Stick Type (2-Piece Set, Connected) | 55 |
| CPH-C1015 | φ10 × 18 / φ15 × 18 | 8 (0.8 kgf) / 20 (2 kgf) | 215 | ||
※ When fully extended, the tip of the CPH-CA has reduced mechanical strength. Therefore, handle it vertically.
※ The CPH-C510 / CPH-C1015 uses a two-piece connected design and can attract objects at both ends.
※ The holding force values are based on SS400 steel, 10 mm plate thickness, and a ground-finished surface.
※ 9.8 N = 1 kgf.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
