Manufacturer: TECHNOPLAN
Model: CPL series

Permanent Magnetic Lifting Magnet

• Because the unit requires no power supply, there is no risk of problems caused by power outages or electrical distribution failures.
• In addition, its compact and lightweight design provides high magnetic holding performance.
• Furthermore, the powerful permanent magnet enables safe lifting operations.
• Suitable for both flat steel and round steel.
• The CPL-100 and CPL-300 support the use of a balance board. By using a balance board, you can perform two-point lifting of large thin steel plates or long round steel bars.

Custom Attachments Available!

600A / 1000A Improved!

In response to customer requests, we have made minor improvements to the 600 and 1000 models:

1. Residual magnetic force when the handle is OFF has been significantly reduced.
2. Handle operation is now smoother.
3. The reduced weight makes operation easier.
4. The dimensions have been revised.

■Custom-Made Product Example■

Model	Lifting Capacity		Round Steel Lifting Standard (mm)		Dimensions (mm)				Lifting Fixture Dimensions (mm)			Weight (kg)
	Steel Plate (kg)	Round Steel	Minimum Diameter (d1)	Maximum Diameter (d2)	L	W	H	R	Diameter	E1	E2
CPL-100	100	50% or Less	φ40	φ150	85	62	67	148	φ8	30	40	2.6
CPL-300	300		φ60	φ200	154	92	91	176	φ12	46	57	9.6
CPL-600A	600			φ300	267	121	92	221	φ16	58	87	20
CPL-1000A	1000		φ70	φ400	350	142	118	314	φ20	83	117	42
CPL-2000	2000		φ150		368	234	212	454	φ27.5	119	158	130
CPL-3000	3000			φ500	448	286	261	550	φ32	157	174	250

※ The lifting capacities shown above are one-third of the maximum value obtained under the following conditions: SS400 steel, 50 mm thickness, surface roughness ▽▽, and full-surface contact. This corresponds to a safety factor of 3. Actual lifting capacity varies depending on the shape and material of the workpiece.

Round Steel Lifting Standard
Unit: mm

※ The lifting capacity varies depending on the diameter of the round steel, so please exercise sufficient caution.
※ At the maximum applicable diameter, workpieces shorter than the magnetic holding surface cannot be lifted.

The values shown above do not guarantee absolute safety.
Depending on factors such as the condition, shape, and thickness of the contact surface, the specified lifting capacity may not be achieved. Therefore, always check the actual conditions carefully before operation.