Manufacturer: TECHNOPLAN
Model: CPH-C series

Magnet Cleaner

<Applications>

• Its compact design allows you to collect small metal parts from narrow spaces that are difficult to reach by hand.
• In addition, you can use it to remove cutting chips and other metal debris left after drilling or tapping, including debris inside holes.

Model	Magnetic Part Dimensions (mm)	Holding Force (N)	Overall Length (mm)	Mechanism	Mass (g)
CPH-CA	φ5	10 (1 kgf)	140–745	Antenna Type	31
※ The fully extended tip of the antenna section has reduced strength. Operate the antenna section vertically.
CPH-C5F	φ4	5 (0.5 kgf)	250	Spring Type	37
※ Flexible mechanism using a rope-like spring. ※ The opposite side of the magnetic part is a φ16.5 ring (inner diameter φ10).
CPH-C510	φ5 × 25	8 (0.8 kgf) / 8 (0.8 kgf)	250 (×2 = 500)	Stick Type Set of 2	55
	φ10 × 18
CPH-C1015	φ10 × 18	8 (0.8 kgf) / 20 (2 kgf)			215
	φ15 × 18
※ Two pieces can be connected for use. The overall length when connected is 500 mm. ※ Magnetic parts are provided at both ends.