Air Knocker, Exen
EXEN RKD80PA Relay Knocker (Direct Type)
Products Made In Japan
Manufacturer: EXEN
Model: RKD80PA
Direct type hammer ring equipment for widespread applications
It has been used in this way
- 01. Food factory RKD used when removing chocolate from formwork in chocolate factory
- 02. Elimination of wall adhesion of tumble dryers
- 03. Excess paint removal for powder coating
- 04. Prevention of wall surface adhesion for heating furnaces, knocking off welding sputtering, and prevention of workpiece adhesion on the mesh in the drying furnace
- 05. Used for engraving
- 06. Moisture drop of the base
Features
- The air-type relay knocker series (direct type) is a unique device in which the piston directly and forced the hopper wall surface etc. with the force of compressed air, and the impact eliminates the adhesion and blockage prevention of powders. In addition, since it can be used only by air supply, it is excellent in safety and economy, and can be used with peace of mind without hindrance to powders with the property of sticking when centrilytic force is given. In the case of the vibe type, it is a type that strikes the fixed position knocker base attached, but it can hit what comes moving, move the knocker itself to hit, and the application will spread with one idea. In addition, it can be used in the same way as vibe type.
Dimensions, installation and operation panel
Product dimension diagram
High strength adoption improves durability
The blow force can be varied by adjusting the supply air pressure.
Relay piping of multiple simultaneous use is possible.
Oil-free, drive-free and eco-friendly
Simple construction and high durability
Large knocker to eliminate blockages
Knocker mounting method
Operating principle of relay knocker
1. Compressed air flowing into the knocker is first supplied to the valve chamber, and the umbrella valve is pushed down and stored in the storage chamber.
2. When the three-way valve is activated to exhaust the air in the valve room, compressed air in the storage chamber moves the umbrella valve up.
3. When the umbrella valve moves, compressed air in the storage chamber pushes the piston down and hits the base surface.
Its impact force eliminates adhesion and blockage of powders.
Specification
| Model | Pressure used (MPa) |
Strike
cycle (times/min) |
Air consumption (L/time (ANR)) |
Strike
Energy (N/m) |
Impact force | Mass (kg) |
|
|---|---|---|---|---|---|---|---|
| (kg/m/s) | Equivalent Hammer (pounds) |
||||||
| RKD30PA | 0.3 ～ 0.7 | 1～60 | 0.05～0.13 | 5.5～13.1 | 1.2～1.8 | 1 or less | 2.1 |
| RKD40PA | 0.15～0.37 | 9.22～22.3 | 2.6～4.0 | 1～1.5 | 5.6 | ||
| RKD60PA | 0.33～0.77 | 20.6～49.0 | 6.9～10.6 | 1.5～3 | 13.1 | ||
| RKD80PA | 0.60～1.40 | 45.1～109 | 15.2～23.7 | 3～8 | 18.4 | ||
| RKD100PA | 0.98～2.28 | 82.4～201 | 30.0～46.9 | 6～15 | 35.5 | ||
| RKD120P | 1～6 | 3.32～6.64 | 131～321 | 52.0～84.0 | Twice the equivalent of 100PA |
52.6 | |
Product dimension table
| Model | φA | φC | D | φE | F | G | H | I | φJ | φK | ST | L | M | O | Use Tube diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RKD30PA | 66 | 70 | 8 | 15.0 | 38 | Rp1/8 | 95 | (25) | 9.0 | 55 | 17 | 50 | 100 | Rp1/4 | φ8Xφ6 |
| RKD40PA | 86 | 95 | 12 | 23.5 | 55 | 140 | 13.0 | 70 | 25 | 75 | 150 | ||||
| RKD60PA | 115 | 138 | 14 | 35.0 | 65 | 183 | 15.0 | 110 | 35 | 90 | 200 | Rp3/8 | |||
| RKD80PA | 146 | 148 | 16 | 47.5 | 60 | Rp1/4 | 222 | (28) | 17.0 | 120 | 40 | Rp1/2 | |||
| RKD100PA | 175 | 208 | 20 | 54.5 | 50 | 270 | 21.0 | 170 | 50 | 250 | Rp3/4 | ||||
| RKD120P | 220 | 235 | 21 | 68 | 43 | 326 | 17.5 | 198 | 47 | 300 | 2-Rp3/4 |
Installation method
Tightening torque table Unit: N/ m
| Nut size | *M6 | M8 | M10 | M12 | M14 | M16 | M20 | |
|---|---|---|---|---|---|---|---|---|
| Tightening torque | Bottom nut | *4.8 | 10.8 | 20.6 | 35.3 | 56.9 | 84.3 | 167 |
| Top nut | *4.8 | 7.6 | 14.4 | 24.7 | 39.8 | 59.0 | 117 | |
* When fixing the main body with the included bolts, spring washers, and hard lock nuts, please protect the tightening torque. If the tightening torque is weak, the nut may loosen due to the impact during operation.
※ For fall prevention, suspend and fix the main body with the attached fall prevention wire and shackle. Be sure to prevent loosening of the screw with wire, etc. on the screw part of the shackle.
Related Products
-
Seiwa E04RC120916 Ferrite Core Non-split Ring Cores RC and RM and RMX Types EMC Products
-
EXEN VB-130AK4R VIBACK Front Assembly
-
EXEN CH32A Ball Vibrator
-
EXEN ADV50VA-6M High Frequency Internal Vibrator Automatic Drive System
-
Seiwa E04FD130505 Ferrite Cores for FPC FD Type EMC Products
-
EXEN HBM60ZX Fin Head
REQUEST QUOTATION
PAYMENT
LINK
