Japan, Kitagawa
KITAGAWA TM Series NC Rotary Table
Made in Japan
Manufacturer: Kitagawa
Model: TM Series
Feature:
Multi spindle range for multiple work piece machining reduces set up time and increase productivity.
Mono-block body & compact design
Ideal for tapping machines with high speed rotation
Tact time reduced
Multi work pieces machining
*CE correspondence
Specification
Model | TM2100 | TM3100 | TM2160 | TM3160 | ||
---|---|---|---|---|---|---|
Right-handed Type | ○ | ○ | ○ | ○ | ||
Left-handed Type | ○ | ○ | ○ | ○ | ||
Table Diameter (mm) | ø105 | ø105 | ø165 | ø165 | ||
Centre Hole Diameter (mm) | ø50H7 | ø50H7 | ø50H7 | ø50H7 | ||
Through Hole Diameter (mm) | ø32 | ø32 | ø40 | ø40 | ||
Centre Height (mm) | 110 | 110 | 140 | 140 | ||
Clamping Method | Pneumatic | Pneumatic | Pneumatic/Air-hydraulic /Hydraulic | Pneumatic/Air-hydraulic /Hydraulic | ||
Clamping Torque (N・m) | at pneumatic 0.5MPa | 117 | 117 | 176 | 176 | |
at air-hydraulic booster 0.45MPa /hydraulic 3.5MPa) |
– | – | 400 | 400 | ||
Motor Axis Reduced Inertia (kg・m2) | 0.000353 | 0.000475 | 0.000145 | 0.000188 | ||
Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 4/5000-B | αiF 4/5000-B | αiF 4/5000-B | ||
Total Reduction Ratio | 4th axis spec. (Fanuc spec.) | 1/36 | 1/36 | 1/90 | 1/90 | |
M signal spec. | 1/36 | 1/60 | 1/90 | 1/120 | ||
Max. Rotation Speed (min-1) |
4th axis spec. (Fanuc spec.) | 83.3 (at motor 3000min-1) |
69.4 (at motor 2500min-1) |
33.3 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
|
M signal spec. | 83.3 (at motor 3000min-1) |
50 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
16.6 (at motor 2000min-1) |
||
Allowable Work Inertia (kg・m2) |
0.054 | 0.054 | 0.51 | 0.51 | ||
Indexing Accuracy (sec) | 60 | 60 | 30 | 30 | ||
Repeatability (sec) | 5 | 5 | 4 | 4 | ||
Mass of Product (kg) | 85 | 100 | 100 | 150 | ||
Allowable Load | Horizontal (kg) | 60 | 60 | 160 | 160 | |
Vertical (kg) | 30 | 30 | 80 | 80 | ||
Manual Tailstock (as an option) |
TS2100RN | TS3100RN | TS2160RN |
Related Products
-
Fukuda Seiko 4SF 3S End Mill 4 flutes (standard blade)
-
MIKI NETSUREN CH-N Hook With Cam
-
Nitta 010 Series Adapter Summary
-
Chiyoda Tsusho FS4/6/8/10/12 SUS Male Elbow
-
Kurimoto MCD- 400, MCD- 500, MCD- 600, MCD- 800, MCD- 1000 Three-shaft Type Indirect Heating Dryer
-
Orientalmotor Electromagnetic Brake Motors