Tohnichi T-S Dial Indicating Torque Wrench

Made in Japan
Manufacturer: Tohnichi
Model: T-S

Torque wrench used to transfer stable torque to bolts, for both tightening and measuring.

T90N-S [Overall length 376 mm]

T180N-S [Overall length 656 mm]

T700N-S [Overall length 1300 mm]

Scale Plate (A red needle is memory pointer)

Application

For inspection or tightening.

T-Handle Dial Indicating Torque Wrench.
Lightweight, easy-to-read dial, suitable for inspection.
Graduated scale with a precise pointer provides accurate torque value readings.
Since the amount of deformation is small, the operator’s fatigue is reduced compared to the flat beam type torque wrench.
T-S models are equipped with a convenient memory pointer (standard) to capture peak torque reading.
Since load is applied with both hands or two person, the applied force is off set, allowing for easy and precise measuring or tightening.
Since the dial is movable, the pointer can be set to the desired torque first and complete tightening as the pointer indicates “0”.
T-S is compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.

Notes:

T700N-S ~ 4200N-S models are manufactured after order is received.
Use a through-hole socket (for power tools) for a square drive of 25.4 mm or larger.
SI unit products and metric unit products are compliant with ISO 6789:2017 starting January 2022. Model names for some products and Calibration Certificates will be different from older products. American unit products are not compliant with ISO 6789:2017.