Japan, Tohnichi
Tohnichi ATG/BTG(-S) Torque Gauge
Made in Japan
Manufacturer: Tohnichi
Model: ATG/BTG(-S)
Tohnichi has released a torque gauge series for very small torque measurements (from 0.5mN•m to 150cN•m).
ATG6CN [L’=89(mm)]
BTG36CN [L’=119(mm)]
Application
Measurement, inspection and tightening of very small torque.
Features
- Bi-directional operation handy type torque gauge.
- Tip equipped with 3-jaw chuck.
- Push lock button helps to fix the clamp easily.
- The dial is scaled by 270 degrees with a stopper which prevents over-loading.
- For calibration, ATGTCL is available for ATG, and BTGTCL for BTG.
- Side scale ensures excellent visibility.
- Also available: Models with top memory pointer in C scale (option) (See dimension drawing.)
- * Note: Except ATG045CN
Specifications
Notes:
1. ATG045CN needs only a very small torque, so no side memory pointer.
No top memory pointer option setting available.
2. Aluminum cover and steel chuck are standard for both ATG and BTG models. Resin cover and chuck are available as an option.
3. When measuring with the ATG/BTG (-S), be sure to clamp at least 10mm of the object to be measured inside the chuck.
Dimensions
Related Products
-
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ 5.0
-
Kondotec CW Series Cuplink Chain Sling
-
SAKUSAKU 16ER 11BSPT Outer Diameter Threading Insert Tapered Pipe Thread 55°
-
Ross Asia MD3 series Port size is 1/4″ to 1/2″. Flow rates up to 110 scfm (3115 l/min)
-
TONE TN-24E-1, TN-24E-2 Electronic Angle Control Wrench
-
MIKI NETSUREN PO819 Single Sided Blow Spanner (65mm)
