H.H.H, Japan
H.H.H Crane Sling (Made To Order)

Made in: Japan
Manufacturer: H.H.H
Featured
HHH slings comply with crane safety regulations.
Can be hung with the working load as shown in the table.
Hang so that the load is even.
Please use spacers for parts that come in contact with sharp corners.
Use at hanging angles of 60 degrees or less.
Note: The force will be reduced to about 60%.
Specifications
Wire Diameter (mm) | Cutting load (tons) | Load (ton) | ||||
1 Hook | 2 HooKs | 4 Hooks | ||||
Straight | 600 | 300 | 600 | |||
6 | 1.81 | 0.3 | 0.57 | 0.5 | 0.84 | 0.75 |
9 | 4.06 | 0.67 | 1.28 | 1.13 | 1.89 | 1.69 |
12 | 6.49 | 1.08 | 2.07 | 1.81 | 3.36 | 3 |
Related Products
-
Fukuda R-1050 PUMP MOTOR UNIT Industrial High-Pressure Pump
-
IMADA CB-301 Digimatic Cable for DS2
-
Okazaki Seiko SEE4GH OK-HARD Coated Solid Carbide Endmulls (4 Flutes)
-
Kamoi Kakoshi No.8500AL Crepe Tape for Flooring Care
-
Chiyoda Tsusho TE-6/8/10/12-AF Anti-Spatter Tubing
-
Niigata Seiki TT-1000KD/ TT-2000KD T-shape Ruler Kaidan