Hachiken, Japan
Hachiken HS Suction Hose
Made in Japan
Manufacturer : Hachiken
Model :HS
The most commonly used insertion type rubber hose.
Feature
- Since it is reinforced with wire, it can be used not only for internal pressure but also for negative pressure lines.
- To attach to piping, simply insert and tighten with a hose band.
Usage
- Factory general piping
Standard specifications
- Maximum operating temperature : -10 to 60°C
- Maximum working pressure : -60kPa to 0.25MPa
- Inner rubber material : EPDM
Structure and material
| Part number | Name | Material |
| 1 | Inner rubber | EPDM |
| 2 | Reinforcing layer | Synthetic fiber |
| 3 | Reinforcing wire | Steel wire |
| 4 | Reinforcing layer | Synthetic fiber |
| 5 | External rubber | EPDM |
Dimensions and performance table
* Please check the outer diameter of the mating part.
| Nominal diameter | A. | B. | C. | L. | Curvature radius | Mass kg/100mm |
|
| At the earliest | Longest | ||||||
| 20A | 19 | 33 | 40 | 150 | 5000 | 110 | 0.1 |
| 25A | 25 | 40 | 40 | 150 | 5000 | 150 | 0.1 |
| 32A | 32 | 46 | 40 | 150 | 5000 | 190 | 0.2 |
| 40A | 38 | 52 | 40 | 150 | 5000 | 230 | 0.2 |
| 50A | 51 | 65 | 40 | 150 | 5000 | 310 | 0.2 |
| 65A | 64 | 79 | 50 | 150 | 5000 | 380 | 0.3 |
| 80A | 76 | 91 | 50 | 200 | 5000 | 460 | 0.3 |
| 100A | 102 | 120 | 75 | 250 | 5000 | 610 | 0.4 |
| 125A | 127 | 146 | 75 | 250 | 5000 | 760 | 0.6 |
| 150A | 152 | 172 | 100 | 300 | 5000 | 910 | 0.6 |
| 200A | 203 | 224 | 150 | 400 | 5000 | 1220 | 0.8 |
※1. Inner diameter dimension A can also be used for gas pipes.
※2. Weight is a guideline.
Option
| Standard | option | |
| Inner rubber material | EPDM | CR, NBR, NR, wear resistant |
<Remarks/Precautions>
- Please contact us for non-standard specifications (diameter, length, etc.).
Related Products
REQUEST QUOTATION
PAYMENT
LINK
