Japan, Yoshitake
YOSHITAKE GD-28S-NE Pressure Reducing Valve – Water
Made in Japan
Manufacturer: Yoshitake
Model: GD-28S-NE
- Maximum Inlet pressure 2.0MPa, applicable to high pressure equipment of high-rise building, factory, plant.
- Wetted parts are made of corrosion-resistant material (diaphragm/O ring is made of chlorinated EPDM), has excellent resistance to chlorine of tap water
- Can be installed in any piping direction, such as horizontal or vertical
- Closed construction could keep no external leakage even if diaphragm damaged.
- Water supply law standards conformity product(E-606)
Specifications
Features | For water, stainless steel, Max. 2.0MPa, JWWA approved | |
---|---|---|
Type | Direct-acting type | |
Specifications | Product type | Direct-acting type |
Nominal size | 20A (3/4″) – 50A (2″) | |
Application | Water | |
End connection | JIS Rc screwed | |
Inlet pressure | Max. 2 MPa | |
Reduced pressure | 0.2 – 0.7 MPa (*) | |
Min. differential pressure | 0.05 MPa | |
Max. pressure reduction ratio | 7 : 1 | |
Working temperature | 5 – 90 degree(C) | |
Material | Body | Stainless steel |
Valve | FKM | |
Valve Seat | Stainless steel | |
Diaphragm | Chlorine resistant EPDM |
Remarks
*Reduced pressure range
A:0.2-0.35MPa
B:0.3-0.7MPa
*Pressure gauge connection diameter is Rc1/4.
*Built-in strainer(40mesh)
*Max .pressure reduction ratio depends on the set pressure.
Dimensions and Weights
Size | L(mm) | H(mm) | Weight(kg) | Cv value |
---|---|---|---|---|
20A(3/4) | 135 | 170 | 2.3 | 2.3 |
25A(1) | 135 | 170 | 2.3 | 3.5 |
32A(1 1/4) | 180 | 224 | 4.9 | 6 |
40A(1 1/2) | 180 | 224 | 4.7 | 7 |
50A(2) | 200 | 239.5 | 6.7 | 11 |
Dimensional drawing
Related Products
-
Chino IR-R80 Series High-Temperature Fixed Point Blackbody Furnace
-
TSURUMI PUMP NK SERIES Single Phase Submersible Pumps
-
TONE 6AH-H Impact Hexagon Socket (Interchangeable Type)
-
Kanetec EPT-3060F/EPT-LW1530F Permanent Electromagnetic Chuck (Standard)
-
YOSHITAKE TSF-11AT Steam Trap/Air Trap
-
Hammer Caster 909LK-POS Hammer Lock