- The shock of water hammer is reduced, and the closing time of valve is shortened.
- No leakage at valve seat because synthetic rubber is used for valve part.
- Usable for wide pressure range of 0 – 1.0 MPa (0.1 – 1.0 MPa if the coil set sideways).
Japan, Yoshitake
YOSHITAKE DP-200F Solenoid Valve
Made in Japan
Manufacturer: Yoshitake
Model: DP-200F
Specifications
Features | AC, normally closed, flanged | |
---|---|---|
Type | Diaphragm type solenoid valve | |
Specifications | Product type | Solenoid Valve_Diaphragm |
Nominal size | 15A (1/2″) – 50A (2″) | |
Application | Cold and hot water,Air,N2 gas,CO2 gas (dry),Ar gas | |
End connection | JIS 10K FF flanged | |
Max. pressure | 1 MPa | |
Working pressure | 0 – 1 MPa (not usable under vacuum) | |
Min. differential pressure | 0 MPa (0.1 MPa or more is required when installed with the coil sideways) | |
Working temperature | 5 – 60 degree(C) (no freeze condition) | |
Ambient temperature | Max. 50 degree(C) (no freeze condition) | |
Rated voltage | AC 110/220V selective type – 50/60Hz common | |
Valve seat leakage | None (by confirming pressure gauge visually) | |
Installation posture | Horizontal or vertical (the coil has to be within 90 degrees from upward position) | |
Protection class | IP64 | |
Material | Body | Bronze |
Valve | NBR (Diaphragm) |
Remarks
* Available with rubber FKM for the diaphragm. Max temperature 90℃.
Dimensions and Weights
Size | L (mm) | H (mm) | Weight (kg) | Cv value |
---|---|---|---|---|
15A(1/2) | 120 | 147 | 2.7 | 4(1.7) |
20A(3/4) | 130 | 153 | 3.3 | 7.5(3.2) |
25A(1) | 145 | 169 | 4.8 | 10(4.6) |
32A(1 1/4) | 160 | 192 | 6.6 | 14(5.5) |
40A(1 1/2) | 170 | 198 | 7.3 | 17(6.5) |
50A(2) | 195 | 213 | 10.0 | 24((9.5) |
*Values in the bracket indicate Cv values when the differential pressure is below 0.01MPa.
About flow rate
Selection data:
Dimensional drawing
Related Products
-
DIJET SNMG120404-KG, SNMG120408-KG, SNMG120412-KG, SNMG120416-KG Semi-Finishing Insert
-
Ross Asia Large capacity Port size from 3/4″ to 1″. Flow rates up to 270 scfm (7646 l/min)
-
SAKUSAKU EHB401010 Square End Mill 2-Flute Regular Cobalt High Speed Steel
-
TERAOKA SEISAKUSHO 647 0.1 Circuit Tape
-
OSC92OT101 Single Component Force Load Cell
-
SAKUSAKU 16ER G60 External Threading Insert General-Purpose 60°