Japan, Watanabe
Watanabe TF-6D AC current RS-485/isolation converter – Signal Converter
Made in Japan
Manufacturer: Watanabe Electric Industry Co. Ltd
Model: TF-6D
A converter that outputs AC signals via RS-485 communication
Features
- It is also possible to output a DC signal proportional to the input signal.
- Plug-in type for easy maintenance.
- Data can be easily output to the sequencer by connecting to the protocol converter (TF-PC).
- Set by the front LED display. Increase work efficiency
Specifications
| input signal | alternating current |
|---|---|
| output signal | RS-485 (ASCII) DC voltage/DC current |
| communication | RS-485 (ASCII) |
| power supply | DC24V |
| tolerance | ±0.1%fs |
| Response speed (0→90%) | 1s |
| Operating temperature and humidity | -5~+50℃ 90%RH or less |
| Withstand voltage | AC1500V |
| External dimensions (HWD) | 98×26×130mm |
| mass (weight) | about 180g |
Related Products
-
Meiko Engineering JA Expansion Joint
-
Chiyoda Seiki GS-500P Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 0.2 to 1.5 MPa, standard flow rate: 560 m3/h・Air)
-
Kakuta No.105 Air Clamp
-
Magnescale MG80-NE/EI/PN/EC MG80-CM Interface
-
Watanabe WAP-AZ AC converter (photocoupler isolation) – Signal Converter
-
Kondotec KM19-KL19 Malleable Iron Cast Wire Rope Clip
REQUEST QUOTATION
PAYMENT
LINK
