Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ3.0
Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5 φ3.0
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
Product name | The collets and collet nut for the Spindle No. 5 φ3.0 |
---|---|
Part number | 5009011 |
Related Products
-
Kondotec Deck-end Roller JIS Type
-
IMADA DSV Series Multi-function Digital Force Gauge
-
Obishi Keiki Seisakusho Cast Iron X-Type Block
-
Kyowa LCW-D-2MNS LCW-D-S Washer-type Load Cell
-
TONE HAP403N Thin Type Wheel Nut Protector Socket Set For Impact Wrench (With Socket Holder)
-
Nippon Grease 70-1 Rust Fighter