Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PPS/SH(M-L)
Polyphenylene sulfide extra low head bolt with hexalobular hole.
| Continuous use temperature | 200°C/392°F |
| Combustion quality | UL94V-0 |
| M | M3 | M4 | M5 | M6 |
| pitch | 0.5 | 0.7 | 0.8 | 1 |
| D×H | 6×1.3 | 8×1.5 | 9×1.5 | 10×1.5 |
| hole number | 8 | 10 | 15 | 20 |
| L(mm) | 6 | 100 | 100 | ─ | ─ |
| 8 | 100 | 100 | 100 | ─ |
| 10 | 100 | 100 | 100 | 100 |
| 12 | 100 | 100 | 100 | 100 |
| 16 | 100 | 100 | 100 | 100 |
| 20 | 100 | 100 | 100 | 100 |
| 25 | ─ | 100 | 100 | 100 |
| 30 | ─ | ─ | 100 | 100 |
| 40 | ─ | ─ | ─ | 100 |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | M3 | M4 | M5 | M6 |
| N m | 0.21 | 0.37 | 0.74 | 1.13 |
Tensile rupture force
| Unit/Unit | M3 | M4 | M5 | M6 |
| N | 396 | 611 | 911 | 1177 |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
