Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PVDF/NT(M)
Vinylidene fluoride resin hexagonal nut.
| Continuous use temperature | 150°C/302°F |
| Combustion quality | UL94 V-0 equivalent |
| M | M3 | M4 | M5 | M6 | M8 | M10 | M12 |
| pitch | 0.5 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 |
| B×H | 5.5×2.4 | 7×3.2 | 8×4 | 10×5 | 13×6.5 | 17×8 | 19×10 |
| ─ | ─ | 100 | 100 | 100 | 100 | 100 | 50 | 50 |
Sales unit Quantity
Torsional rupture torque
Tensile rupture force
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior, but this does not affect performance.
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
- The remaining gate at the screw tip is less than 5% of the length (L).
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
