Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp KD Series T.S.K Hot-air Generator
Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: KD Series
Features
Continuous use max. hot-air temp. 350ﾟC
Discharge pressure is more than 12kPa.
Hot-air circulation of 160ﾟC can be correspond at all type. (Energy saving !)
Specification
| Model | Type | Power | Heater | Continuous use max. temp. | Motor capacity | Max. air volume | Max. static presuure |
| 50/60Hz | capacity | (m3/min) | (kPa) | ||||
| KD-24H3 | 3200-3C-1.5HY-LB | 3-phase 200V | 3kW | 350ﾟC | 1.5kW | 7.1 | 12.1 |
| 3200-5C-1.5HY-LB | plus minus 10% | 5kW | |||||
| 3200-7.5C-1.5HY-LB | 7.5kW | ||||||
| KD-56H3 | 3200-9C-2.2HY-LB | 9kW | 2.2kW | 10 | 13.5 | ||
| 3200-12.5C-2.2HY-LB | 12.5kW | ||||||
| KD-72H3 | 3200-15C-3.7HY-LB | 15kW | 3.7kW | 18 | 13.5 | ||
| 3200-20C-3.7HY-LB | 20kW | ||||||
| KD-82H2 | 3200-20C-5.5HY-LB | 20kW | 5.5kW | 27.8 | 13.2 | ||
| 3200-30C-5.5HY-LB | 30kW | ||||||
| KD-82H3 | 3200-20C-7.5HY-LB | 20kW | 7.5kW | 28.5 | 18.4 | ||
| 3200-30C-7.5HY-LB | 30kW | ||||||
| KD-82H5 | 3200-320C-11HY-L | 30kW | 11kW | 24 | 24 |
Related Products
-
DIJET SKG-R Series Facemill For High Feed Machining With 4 Corners
-
Maeda Koki FITVM Type Flow Indicator
-
OSC 92TP101 Barometer
-
Chiyoda Seiki GS-2000PH Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 1.0 to 6.0 MPa, standard flow rate: 2700 m3/h・Air)
-
SANYUTEC FM-Type Heavy Duty Mechanical Spline Shafted Type Universal Joint
-
TONE BPL700 & BPL900 Long Ball Point Hex Key Wrench Set L-Type
