Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp Blow-nozzle General type
Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Blow-nozzle
Specification
|
[ Common specification ] |
[ Structure ] |
| ･ Resisting pressure : 49kPa ･ Max. use temp. : 350ﾟC ･ Material : SUS304 ･ Accuracy rating : Disorder of the air- speed of the right and left is less than plus minus 3.5% ･ Fixed metal fittings is equipped by default to all type |
 |
| Model | Bore of the inlet | Slit width | Max. use discharge air-speed | Manufacturable length |
| 25DS | φ25 | 1.0mm | 100m/s | 100mm – 300mm |
| 65m/s | 100mm – 400mm | |||
| 1.5mm | 65m/s | 100mm – 300mm | ||
| 45m/s | 100mm – 400mm | |||
| 38DS | φ38 | 1.0mm | 100m/s | 300mm – 600mm |
| 65m/s | 300mm – 1000mm | |||
| 1.5mm | 65m/s | 300mm – 600mm | ||
| 45m/s | 300mm – 1000mm | |||
| 50DS | φ50 | 1.0mm | 100m/s | 600mm – 1000mm |
| 65m/s | 600mm – 1500mm | |||
| 1.5mm | 65m/s | 600mm – 1000mm | ||
| 45m/s | 600mm – 1500mm | |||
| 2.0mm | 50m/s | 600mm – 1000mm | ||
| 35m/s | 600mm – 1500mm |
Related Products
-
Chiyoda Seiki TKR-30H/TKR-30H-H/MR-30H/MR-30H-H (Primary pressure: 20.0 MPa or less/adjustment pressure 0.5 to 3.0 MPa)
-
Vessel No.KMD “KESSAKU” Drill Bit( for steel)
-
NAGANO KEIKI KM18 Miniaturized Embed Pressure Transmitter
-
KETT ELECTRIC LABORATORY KJT-230 NIR Moisture Meter
-
Murata Conductor And Conductor Band Support Fittings For Panzermasts And Concrete Pillars
-
Fujii Denko Pole Platform (Single Footrest Type)
REQUEST QUOTATION
PAYMENT
LINK
