IKURA SEIKI, Japan
IKURATOOLS ISK-MP2050LF Cordless Puncher
Made in: Japan
Manufacturer: IKURA SEIKI
Model: ISK-MP2050LF
Features
Industry’s first 36V puncher
Overwhelmingly high power that is comparable to 100V
Lightweight 11.6kg
Battery pack included hybridfully double-acting
Normally, it returns speedily with the power of the spring.
When biting, it returns with the force of hydraulic pressure.
No stress
90 punches on a single charge (SS400Φ20 t=9)
Specification
| Motor | DC36V |
| Power | Battery pack DC36V 2.5Ah (Li-ion) charger AC100V 50/60Hz |
| Charging time | 32 min. |
| Stroke | 18mm |
| Mass | 11.6kg (including battery pack) |
Standard Accessories
Single-sided spanner #10 and 17, hex wrench #3, punch die set (14F), punch holder tightening bar, 1 battery pack, charger, carrying case (made of resin),
side handle.
Optional knife dimensions
| Round Hole Replacement Blade(mm) | Hole Diameter (φ) | 6 | 8 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| Maximum Thickness of SS400 (t) | 4 | 6 | 6 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | |
| Maximum Thickness of SUS304 (t) | – | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| Channel Steel | – | – | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Oblong Hole Replacement Blade(mm) | Hole Dimensions (WXL) | 6.5×10 | 8.5×13 | 10×15 | 11×15 | 12×18 | 13×19.5 | 14×21 |
| Maximum Thickness of SS400 (t) | 6 | 6 | 8 | 9 | 9 | 9 | 9 | |
| Maximum Thickness of SUS304 (t) | 4 | 4 | 6 | 6 | 6 | 6 | 6 | |
| Channel Steel | – | 8 | 8 | 8 | 8 | 8 | 8 |
Related Products
-
Watanabe TH-2C/TH-5C Thermocouple Temperature Converter – Signal Converter
-
Watanabe A6000 Series A6□□8 Digital Panel meter for temperature measurement
-
NMC Nk-3000NS Exportable Long-Term Rust Preventive
-
MIKASA MTR-40H Tamping Rammer
-
H.H.H. Wire For Hand Winch
-
Matsumoto Kikai MAKO-Z0/Z1 Linear Carriage
