Japan, Kanetec
Kanetec EP-QS5-3060A Permanent Electromagnetic Chuck For Milling
Product Made in Japan
Manufacturer: Kanetec
Model: EP-QS5-3060A
A Line-up of Products Selectable According to Machining Methods and Workpieces.
Electricity is required only when mounting and dismounting workpieces.
Workpieces can be held firmly in the event of power failure.
Usable in wet machining operations.
Application
Suitable for securing workpieces during cutting on milling machines and machining centers.
Features
Can be used in wet machining operations.
Less accuracy change and highly robust construction.
Magnetization and demagnetization in a very short time.
Tapped holes on the attractive face can be used to install various blocks to hold workpieces by various methods according to machining operations.
The chuck is very thin, 70 mm in height, and lightweight.
Straightening blocks are also available that are mounted on the chuck work face to hold workpieces by an induction field. These optional products are very useful for such workpieces of irregular attractive faces that for example have steps and distortion and for machining the bottom and side faces of workpieces.
The detachable feeder connector is optionally available for pallet change.
When ordering
- Sizes other than the standard sizes listed in the right-side table are also available.
- The maximum one-piece size is W1300 x L1500 mm. For larger sizes, chucks are to be connected.
- When workpieces are hardened steels or special steels, they may be difficult to dismount due to strong residual magnetism.
Specification
[mm(in)]
| Model | Dimension | No. of Poles | Mass | Applicable Chuck Master | |||
| Width | Length | Height | |||||
| EP-QN5 | 3060A | 300(11.8) | 610(24.0) | 70(2.75) | 24 | 90Kg/198lb | EPS-P2100B |
| 4080A | 420(16.5) | 800(31.5) | 40 | 160Kg/352lb | |||
| 50100A | 500(19.6) | 960(37.8) | 60 | 230Kg/507lb | |||
| 60100A | 600(23.6) | 72 | 280Kg/617lb | ||||
| EP-QN7 | 4080A | 390(15.3) | 800(31.5) | 24 | 150Kg/330lb | EPS-P2100B | |
| 50100A | 500(19.6) | 1000(39.3) | 40 | 240Kg/529lb | EPS-P2100B-2 | ||
| 60100A | 620(24.4) | 50 | 300Kg/661lb | ||||
| EP-QS5 | 3060A | 300(11.8) | 610(24.0) | 70(2.75) | 32 | 90Kg/198lb | EPS-P2100B |
| 4080A | 420(16.5) | 800(31.5) | 60 | 160Kg/352lb | |||
| 50100A | 500(19.6) | 960(37.8) | 84 | 230Kg/507lb | EPS-P2100B-2 | ||
| 60100A | 600(23.6) | 108 | 280Kg/617lb | ||||
| EP-QS7 | 3060A | 300(11.8) | 600(23.6) | 18 | 86Kg/189lb | EPS-P2100B | |
| 4080A | 390(15.3) | 800(31.5) | 32 | 150Kg/330lb | |||
| 50100A | 470(18.4) | 1000(39.3) | 50 | 220Kg/529lb | EPS-P2100B-2 | ||
| 60100A | 620(24.4) | 70 | 300Kg/661lb | ||||
Electro Chuck master is separately needed
EP Chuck Master
EPS-P2100B-2
Options
Straightening blocks for 50 and 70
Separately installed feeder
Recommended for pallet change spec.
Model of special specification
EP-QX50-S
Model with T-slots available
For more information, please contact us.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
