Nissan Tanaka
NISSAN TANAKA COMET(CML Series) Industrial Pressure Regulator
Manufacturer: Nissan Tanaka
Model: COMET(CML Series)
Low Pressure/Piping and Tubing Connection Type.
Features
- A high-functionality model equipped with a stainless steel diaphragm.
- The pressure adjustment handle is equipped with a push-in display function.
- The back of the regulator body is standard processed with screw holes for panel mounting.
Specifications
Model | CML-50X□□-RC4RC4 | |||||
---|---|---|---|---|---|---|
03 | 06 | 10 | 15 | |||
Gas used | Oxygen, Nitrogen, Argon, Helium, Hydrogen, dry air | |||||
Pressure gauge [MPa] | Inlet Side | None | ||||
Outlet Side | 0.3 | 0.6 | 1.0 | 1.5 | ||
Max working pressure [MPa] | Inlet Side | 3.0 | ||||
Outlet Side | 0.2 | 0.4 | 0.6 | 0.99 | ||
Inlet and Outlet Shape | Inlet Side | Rc1/4 | ||||
Outlet Side | ||||||
Rated Flow | 120 | 220 | 280 | 380 | ||
Terms | P2 | 0.2 | 0.4 | 0.6 | 0.99 | |
Gas | Nitrogen | |||||
Operating Temperature Range [°C] | -5~4 0 | |||||
Material (Main Body) | C3604 Nickel plating | |||||
Valve | None | |||||
Discharge Valve | None | |||||
Weight [kg] | 1.0 |
External view
Flow Characteristics
※ The usable flow range is within a 20% pressure drop from the set pressure, or up to two-thirds of the maximum discharge amount, whichever provides the greater flow rate.
Accessories
※ The inlet fittings of the flowmeter and needle valve are M16×1.5 female nuts, and can be easily connected to CMH without a needle valve.
⚠️Warning: For correct usage, please make sure to read the ‘Instruction Manual’ carefully before use.
Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka
Related Products
-
NISSAN TANAKA FMR III Laser Cutting Machine
-
NISSAN TANAKA 101ZA, 112ZA Cutting Torch Z (Straight Type)
-
NISSAN TANAKA MACH/ WIND Fiber Laser Cutting Machine
-
NISSAN TANAKA LMZ V Bevel Laser Cutting Machine
-
NISSAN TANAKA 161MS,162NZ,162MZ,163P,163K,167Z,168Z Welding Torch
-
NISSAN TANAKA KT-540J NC Gas Cutting Machine