Japan, Kanetec
Kanetec KSC-W Spiral Magnetic Conveyor
Product Made in Japan
Manufacturer: Kanetec
Model: KSC-W
Application of KSC-W
Widely used as a means to transfer chips produced from machining by machine tools to a point of collection. If oil sticks to chips, you can reduce it by allowing the oil to drop naturally while transferring the chips.
In particular, this model is suitable for transferring chips from gear-cutting machines, end-milling machines, and milling machines.
This model can also continuously transfer granular parts.
Features of KSC-W
■ Superb durability and safety
Simple construction and practically no maintenance required.
Since the enclosed cylinder houses the mechanically moving (rotating) parts, it eliminates the fear of accidents due to collision.
■ Economical functions
High processing capacity and high transfer efficiency.
As the spiral slide movement carries chips, their movement effectively causes sticking oil to drop off.
There is no place where oil stays and therefore oil natural drop is ideal for improving the efficiency of the collection of liquid.
■ Low running cost
Only a slight amount of power is required to drive the rotation, while the permanent magnets handle most of the work.
※For other special lengths, please contact us.
You can increase the length in units of 100 mm.
■ The waterproof feature enables the collection of chips in liquid.
※The motor is not waterproofed. Keep it away from water.
<Construction of KSC-W>
The spiral magnetic conveyor motor slowly rotates the internal shaft with spirally arranged magnets inside the nonmagnetic stainless steel cylinder. Magnetic chips/pieces attracted on the outside of the cylinder are transferred in a sliding motion.
An example of discharging chips
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Kanetec PCMG-C Super powerful round grid type magnetic bar unit
-
YOSHITAKE TSF-11SF Steam Trap/Air Trap
-
TERAOKA SEISAKUSHO 5610 #2 Nomex(R) Adhesive Tape
-
Honda Kiko FRS/FR Cascade pumps
-
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ 4.0
-
TONE HTX308L Long Torx Socket Set (Heavy Duty, with Socket Holder)