Japan, Murata
Murata Rebar clamp 74606~74614
Product made in Japan
Manufacturer : Murata
Model : 74606~74614
Clamp type (hinge type)
| Model | Material | Rebar size (Aφ) | B | C | D | E | F | G | |
|---|---|---|---|---|---|---|---|---|---|
| 74606 | Iron (hot-dip galvanized) | D13 | 12.66 | 93 | 74 | 48 | 97 | 62 | 19 |
| 74607 | D16 | 16.66 | 93 | 74 | 48 | 97 | 62 | 19 | |
| 74608 | D19 | 20.95 | 93 | 74 | 48 | 97 | 62 | 19 | |
| 74609 | D22 | 26.35 | 93 | 74 | 48 | 97 | 62 | 19 | |
| 74610 | D25 | 32.66 | 93 | 74 | 48 | 97 | 62 | 19 | |
| 74611 | D29 | 38.26 | 93 | 74 | 48 | 97 | 62 | 19 | |
| 74612 | D32 | 40.26 | 96 | 76 | 49 | 99 | 63 | 19 | |
| 74613 | D35 | 43.59 | 98 | 79 | 50 | 98 | 80 | 15 | |
| 74614 | D38 | 48.56 | 98 | 79 | 50 | 98 | 80 | 15 | |
※You can select the terminal to be attached to the reinforcing bar clamp from the G terminal, F terminal, S terminal, or crimp terminal on the conductor connection terminal page. Please consult us separately.
Clamp type (hinge type) installation method
If the down conductor is to be used as a reinforced column due to the use of a structure, connect it using a special connection fitting.
Sandwich the reinforcing bars using the reinforcing bar connection fittings (hinge type) that match the size of the reinforcing bars, and securely tighten with two M10 bolts.
Tighten and secure the connection terminal with the conductor attached to the terminal block (2-M10 tapped holes) on the side of the connection fitting with two M10 bolts.
Clamp type (hinge type) How to install 2 reinforcing bars
If reinforcing bars are used for the structure, use two reinforcing bars instead.
Sandwich the reinforcing bars using the reinforcing bar connection fittings (hinge type) that match the size of the reinforcing bars, and securely tighten with two M10 bolts.
Tighten and secure the connection terminal with the conductor attached to the terminal block (2-M10 tapped holes) on the side of the connection fitting with two M10 bolts.
