Japan, Kanetec
Kanetec MM FREE BLOCK
Product Made in Japan
Manufacturer: Kanetec
Model: MM (MM2F-512/MM3F-612/MM3F-912/MM3Y-1023)
Freely workable permanent magnetic block.
Application
These blocks are designed to allow deep engraving such as grooves and steps on the attractive face to fit workpiece shapes when holding workpieces.
Features
●The attractive face can be removed up to 10 mm deep from the surface of the new block.
●As workpieces can be fitted in grooves, a large machining pressure can be used. Also cemented carbide workpieces, which are difficult to hold by a magnetic chuck, can be secured by using these blocks to enable grinding.
●These blocks can be mounted on the magnetic chuck work face.
●There are two types; a magnetic force ON-OFF type and a type not equipped with an ON-OFF function.
Dimensions
Specifications
※The holding power is a reference value obtained using a test piece of S15C, □50 × t25, ground surface.
※For MM3Y-1023, a dedicated handle is included.
※Note that when workpieces are held on two or more faces simultaneously, the holding power of each face drops.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
UHT CORPORATION GU-1 full set Cylinder polishing unit
-
Tosei Sharyo 220SOE/215SOE Series Light Duty Corner Caster
-
Kyowa 4109R (EPRC07-R9FNDIS) connector
-
Chiyoda Seiki GS-1000P Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 15.0 MPa or less/adjustment pressure 0.2 to 1.5 MPa, standard flow rate: 1050 m3/h・Air)
-
Vessel No.M-A14H TAPPING Bit(High power tip) Magnetized
-
Takenaka Seisakusho NANOTECT® Coating Bolt