Electronic Magnetic Industry Co. | Kouei Japan Trading | Get Quotation

EMIC Pole Coil For BH Analyzer

kvt part2 — Thu, 03 Dec 2020 02:26:05 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Pole coil

The post EMIC Pole Coil For BH Analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC Low Permeability Measuring Coil Low permeability measurement coil for BH analyzer

kvt part2 — Thu, 03 Dec 2020 02:21:41 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Low Permeability Measuring Coil

The post EMIC Low Permeability Measuring Coil Low permeability measurement coil for BH analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC Epstein Test Frame for BH analyzer

kvt part2 — Thu, 03 Dec 2020 02:16:33 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Epstein Test Frame

The post EMIC Epstein Test Frame for BH analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC J-coil for BH analyzer

kvt part2 — Thu, 03 Dec 2020 02:08:45 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: J-coil for BH

The post EMIC J-coil for BH analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC Hole Probe for BH analyzer

kvt part2 — Thu, 03 Dec 2020 02:02:43 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Hole Probe for BH

The post EMIC Hole Probe for BH analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC High Temperature Electromagnet High Power Output With New Design, Suitable For Low To High Temperatures

kvt part2 — Thu, 03 Dec 2020 01:58:54 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: High Temperature Electromagnet

Specifications

Pole diameter	φ80㎜、φ100㎜、φ120㎜
Magnetic pole GAP	0～80㎜
GAP variable	Electric type (handwheel type by switching, digital panel display possible)
Rated current	100A
Generated magnetic field (at 100A) 10mmGAP	3.2T or more
External dimensions (mm) and mass	Approx. 1260W×1676H×1160D Approx. 3,500kg

The post EMIC High Temperature Electromagnet High Power Output With New Design, Suitable For Low To High Temperatures first appeared on Kouei Japan Trading | Get Quotation.

EMIC EMD-80M25M for room temperature BH Analyzer Electromagnet 2.5T

kvt part2 — Thu, 03 Dec 2020 01:58:00 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: EMD-80M25M

Specifications

Pole diameter	φ80㎜
Magnetic pole GAP	0～70㎜
GAP variable	Electric (handwheel type by switching)
Coil Resistance	1.6Ω
Rated current	30A
Generated magnetic field (at 30A): 10mmGAP 20mmGAP 30mmGAP 40mmGAP	2.5T 2.0T 1.5T 1.1T
External dimensions (mm) and mass	Approx. 765W×1600H×900D Approx. 1,500kg

The post EMIC EMD-80M25M for room temperature BH Analyzer Electromagnet 2.5T first appeared on Kouei Japan Trading | Get Quotation.

EMIC EMD-80M20 for room temperature BH Analyzer Electromagnet 2T

kvt part2 — Thu, 03 Dec 2020 01:52:28 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: EMD-80M20

Specifications

Pole diameter	φ80㎜
Magnetic pole GAP	0～45㎜
GAP variable	Manual type
Coil Resistance	2.6Ω
Rated current	20A
Generated magnetic field (at 30A) 10mmGAP 15mmGAP 20mmGAP 30mmGAP	2.0T 1.6T 1.4T 1.1T
External dimensions (mm) and mass	Approx. 500W×1450H×500D Approx. 300kg

The post EMIC EMD-80M20 for room temperature BH Analyzer Electromagnet 2T first appeared on Kouei Japan Trading | Get Quotation.

EMIC Low Temperature Electromagnet BH analyzerfor cryogenic electromagnets

kvt part2 — Thu, 03 Dec 2020 01:51:15 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Low Temperature Electromagnet

Specifications

Pole diameter	φ100mm (-40°C~+80°C)
Magnetic pole GAP	0～60㎜
GAP variable	Electric (handwheel type by switching)
Rated current	30A
Generated magnetic field (at 100A) 10mmGAP	2.0T or more
External dimensions (mm) and mass	Electromagnet alone about 500 kg

The post EMIC Low Temperature Electromagnet BH analyzerfor cryogenic electromagnets first appeared on Kouei Japan Trading | Get Quotation.

EMIC AMS-10 Amorphous Wire Measuring System

kvt part2 — Thu, 03 Dec 2020 01:46:00 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: AMS-10

Specifications

Model	AMS-10 Amorphous Wire Measurement System
Magnetic field generation coil	Helmholtz coil: 4mT or more (at500Hz)
Detection Coil	Differential type
H Measuring Unit	Shunt resistance system
B Measuring Section	Analog integration method
Measurement frequency	Band: 100~1kHz (-3dB)
Power Source	AC100～240V　50/60Hz
Magnetic field generation coil	650 (W) × 300 (H) × 140 (D) mm or less Approx. 6 kg
Measurement Amplifier	260 (W) × 180 (H) × 300 (D) mm or less Approx. 5 kg

The post EMIC AMS-10 Amorphous Wire Measuring System first appeared on Kouei Japan Trading | Get Quotation.

EMIC NI Specimen for Calibration BH analyzercalibration NI specimen

kvt part2 — Thu, 03 Dec 2020 01:43:55 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: NI Specimen for Calibration

Features

for verification of operation before hard magnetic material measurement

The post EMIC NI Specimen for Calibration BH analyzercalibration NI specimen first appeared on Kouei Japan Trading | Get Quotation.

EMIC BH-1000H BH Analyzer For Hard Materials

kvt part2 — Thu, 03 Dec 2020 01:43:00 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: BH-1000H

Features

Wide range of measurements from micro-cores to permanent magnets
10 times the number of samples used for high-resolution measurements
It is possible to measure without choosing an electromagnet.
(Depends on power supply specifications)
By providing a protection circuit, it is safe and secure even in the event of miswiring.

Specifications

Measurement department	Measurement modeMeasurement itemMeasurement accuracymeasurement rangeResolutionSample rateInputPower supply	DC Magnetization Characteristics High Coercive Force Material Degaussing Properties (BH) max: Maximum Energy Product, HK/Hcj: Square Ratio, Hk (% configurable), etc. B Measurement ±1% 50μV H Measurement ±1%±50μV + Hall Probe Accuracy (Max±1%-2T~2T) ±10V 24bit 100μsec AC100V±10% 50/60Hz
Excitation power supply unit	Maximum Output (Optional) Input Power (Optional)	±40V/±15A or ±60V/±30A ±40V/±15A AC100V±10% 50/60Hz Max 1.4kVA ±60V/±30A AC100V or AC200V±10% 50/60Hz Max 2.5kVA or 3.0kVA
mass		Approx. 210kg
Operating temperature range		5～35℃
accessory		Laptop (with dedicated software), mouse

The post EMIC BH-1000H BH Analyzer For Hard Materials first appeared on Kouei Japan Trading | Get Quotation.

EMIC Ring For Verification Of Operation BH Analyzer Operating Confirmation Ring

kvt part2 — Thu, 03 Dec 2020 01:37:51 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Ring for verification of operation

The post EMIC Ring For Verification Of Operation BH Analyzer Operating Confirmation Ring first appeared on Kouei Japan Trading | Get Quotation.

EMIC CDM-4104 Crack Depth Gauge

kvt part2 — Thu, 03 Dec 2020 01:36:53 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: CDM-4104

Features

It is a contact type because of the potential difference method, but in order to capture the electrical resistance,
It doesn’t matter if the crack is open or not.
Easy measurement without medium.
There are a wide variety of measurement points.
We will design the probe according to your needs.

Specifications

Model	ＣＤＭ－４１０４
Measurement method	DC potential difference method
Measuring range	０．０～２０．０ｍｍ
indication	3 digits
I/o	ＵＳＢ２．０
power	ＡＣ１００～ＡＣ２４０Ｖ　５０／６０Ｈｚ
Exterior dimensions	Ｗ２６０×Ｄ３５０×Ｈ８８㎜
mass	Approx. 5kg

The post EMIC CDM-4104 Crack Depth Gauge first appeared on Kouei Japan Trading | Get Quotation.

EMIC BH-1000 BH analyzer for soft materials

kvt part2 — Thu, 03 Dec 2020 01:33:59 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: BH-1000

Features

High-resolution measurement is possible by sampling 100 times the number of samples as before.
Original sampling method without integrator greatly reduces drift
The measurement speed can be arbitrarily changed, so the magnetization characteristics can be evaluated by the applied acceleration of the magnetic field.
By being able to draw waveforms on top of each other, it is possible to compare characteristics more clearly.
In addition to DC magnetization characteristics, functions that allow you to freely set the magnetic field and AC magnetization characteristics can be added as options.
By providing a protection circuit, it is safe and secure even in the event of miswiring.

Specifications

Measurement department	Measurement Mode	DC Magnetization Characteristics
*Optional		Non-historical magnetization characteristics * AC attenuated magnetic field (~10kHz), bias magnetic field polarized magnetization characteristics * Applied magnetic field arbitrarily variable AC magnetization characteristics * Excitation sine wave (~10kHz), *flux sine wave is not allowed
Measurement Items		Bmax: Maximum Magnetic Beam Density Bmin: Minimum Magnetic Magnetic Magnetic Density Jmax: Maximum Magnetized Jmin; Minimum Magnetization Hmax: Maximum Applied Magnetic Field Hmin: Minimum Applied Magnetic Field Br: Residual Magnetic Flux Density Jr: Residual Magnetization Br/Bmax(Jr/Jmax): Angular Ratio Hcb: Coercivity on BH Curve HCJ: Coercivity on JH Curve μi: Initial Specific Permeability in Magnetic Field Hi μm: Maximum Specific Permeability W: Hysteresis loss PS: Iron loss
Measurement accuracy		B Measurement ±1%±50μV H Measurement ±1%±20μA (1A or less) H Measurement ±1%±500μA (more than 1A)
Measuring range		±10V/±15A
resolution		24bit
Sample Rate		10 μsec/100 μsec (measurements over 50 seconds)
Input Power Supply		AC100V±10％　50/60Hz
Excitation power supply unit	Maximum Output (Selective) Input Power Supply	±40V/±15A or ±60V/±5A ±40V/±15A AC100V±10% 50/60Hz Max 1.4kVA ±60V/±5A AC100V±10% 50/60Hz Max 700VA
mass		Approx. 180kg
Operating temperature range		5～35℃
accessory		Laptop (with dedicated software), mouse

The post EMIC BH-1000 BH analyzer for soft materials first appeared on Kouei Japan Trading | Get Quotation.

EMIC MSM-1025S Magnetic Saturation Inductive Measuring Device

kvt part2 — Thu, 03 Dec 2020 01:27:11 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: MSM-1025S

Features

The magnetic saturation point of magnetic materials can measure quickly and accurately.
The magnetic field generator adopts neodymium magnets, which is 1/3 the size of the conventional one.

Specifications

Magnetized magnetic field	796kA/m（≒10,000Oe）
Sample geometry	Max φ30×20㎜
Measuring range	199.9emu/g(A㎡/kg) or less
precision	Range F.S. ±1%
Mass range	100g
power	AC100V±10％　50/60Hz　5A
Dimensions (mm) and mass	1250W×1015H×750D Approx. 250kg

The post EMIC MSM-1025S Magnetic Saturation Inductive Measuring Device first appeared on Kouei Japan Trading | Get Quotation.

EMIC MA-7115S Dedicated Magnet Analyzer

kvt part2 — Thu, 03 Dec 2020 01:25:33 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: MA-7115S

Features

Sequencer control allows for immediate start and after the measurement is complete
Automatically process everything from OK to NG judgment
Positioning can set by joystick
Probe movement during measurement is control by PC side
Probe positioning can set with a minimum pitch of 0.1 mm
PC screen display items
Status display: measuring, waiting, operating, abnormal work counting: number of measurements, number of OK, number of NG
Result display: Maximum and minimum polar peak, polar width, and polar phase difference
The specifications of PC and Gauss meter are in accordance with the standard products.
Rotational direction resolution can be 50,000~1,200,000 P/R
There are two types for cylindrical evaluation and plane evaluation.

The post EMIC MA-7115S Dedicated Magnet Analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC LP-141A High Precision Low Permeability Meter

kvt part2 — Thu, 03 Dec 2020 01:20:31 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: LP-141A

Features

It can accurately measure materials with low permeability in a short time.
Easy to control the quality of materials.
Foreign material contamination test can be performed.

Specifications

Measuring range	1.001～4
Measuring range	1.03, 1.1, 1.3, 2.0, 4.0 (5 ranges)
precision	±3% of the range
Calibration methods	Standard specimen included
output	DC 1V/F.S. (except when setting Range 1)
power	AC100V±10% 50/60Hz Approx. 50VA
Dimensions (mm) and mass	260W×162H×310D (including protruding part) approx. 4kg

The post EMIC LP-141A High Precision Low Permeability Meter first appeared on Kouei Japan Trading | Get Quotation.

EMIC WT-4104 Quenching Machine

kvt part2 — Wed, 02 Dec 2020 19:35:27 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: WT-4104

Specifications

Model	WT-4104
indication	5 digits
Measuring range	0.00～300μV
Repeatability	±1.0μV
function	Comparator function, sampling function
I/o	USB2.0 judgment output
Power input	AC100V～240V
Dimensions	260W×350D×88H
mass	Approx. 5kg

The post EMIC WT-4104 Quenching Machine first appeared on Kouei Japan Trading | Get Quotation.

EMIC MA-7115 Magnet Analyzer

kvt part2 — Wed, 02 Dec 2020 15:04:16 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: MA-7115

Features

Measure and evaluate the surface flux density of magnetized magnets with a probe
Gaussmeter and Hall probe support 3-axis measurement, allowing simultaneous X, Y, and Z flux density evaluation (MA-7315 only)
Measurement data is output in CSV format, so it can be imported into general-purpose spreadsheet software.
There are two types for cylindrical evaluation and plane evaluation.

Specifications

Measurement and Processing Equipment Department	MA-7105	MA-7115	MA-7315
Gausmeter	GM-5015S		GM-5317S
Measurement input	1ch		3ch
computer	PC/AT Compatible Machine
OS	Windows 10 Professional
AD conversion resolution	12bit
Attachment Software	Microsoft Office Personal
monitor	1024×768 or higher recommended
printer	Color inkjet printer (optional)
Power input	AC100～240V　50/60Hz

Cylindrical magnetic field measurement section	MA-7105	MA-7115	MA-7315
Workpiece fixation	3 Jaw Scroll Chuck
Fixable dimensions	BS nail φ2mm~φ42mm SS nail φ42mm~φ100mm However, outer diameter
Rotary drive	Speed Control Motor
Rotational Directional Resolution	25000P/R
Up and down movement range	100mm (manual)	200mm (Automatic)
Dimensions (mm) and mass	400W×600H×300D ‘ approx. 38kg	400D×750H×400D approx. 45kg

The post EMIC MA-7115 Magnet Analyzer first appeared on Kouei Japan Trading | Get Quotation.

EMIC CFG-1000 Digital Flux Calibrator

kvt part2 — Wed, 02 Dec 2020 01:55:39 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: CFG-1000

Features

Calibration possible up to 0.01mWb~20Wb
Measurement results are displayed in an easy-to-read OLED
Remote function improves work efficiency

Specifications

Calibration range	0.1mWb～10wb
Output waveform	Rectangular wave
Output Voltage	±50mV RANGE (1mWb, 10mWb, 100mWb) ±5V RANGE (1Wb・10Wb)
Output time	2ms～2000ms
range	1 mWb, 10 mWb, 100 mWb, 1Wb, 10Wb
Output accuracy	1% or less in each range
I/O	DRIFT (FET output) MEAS (FET output) RESET (FET output)
power	AC100~240V 50/60Hz (AC adapter input) current consumption less than 0.1A
Dimensions (mm) and mass	160W×131.5H×261D Approx. 1.4kg
Specification Environment	0~40°C 85%Rh or less

The post EMIC CFG-1000 Digital Flux Calibrator first appeared on Kouei Japan Trading | Get Quotation.

EMIC FMI-2000R Compact flux meter

kvt part2 — Wed, 02 Dec 2020 01:48:43 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: FMI-2000R

Features

1 function, 1 key, so easy to operate
Stored the measured values and results at the time of judgment on the microSD card
Control input can control the measurement operation and can be automated
Power input AC100~240V support

Specifications

Measuring range	2.000mWb, 20.00mWb, 200.0mWb, 2000mWb
Measurement Mode	NOR: Normal (polar), PEAK: Peak hold (non-polar). PEAK to PEAK: Peak to Peak (non-polar)
Measurement accuracy	±1％/F.S.
Hold time	±1％/F.S.（60sec）
Analog output	DC±2V/F.S.
Comparative judgment output	Hi/Pass/Lo Isolated Open Collector Output
Externally controlled output	Measurement Start Input (MEAS), Reset Input (RESET), Coil Break (COIL), External Trigger (TRG)
RS-232C Communication Speed	9,600、19,200、38,400bps
power	Single-phase AC100~240V 50/60Hz (AC adapter input)
Operating temperature range	＋10～＋40℃
Dimensions (mm) and mass	(253) W×(94)H×(290)D Including handle, terminal, and leg Approx. 2kg

The post EMIC FMI-2000R Compact flux meter first appeared on Kouei Japan Trading | Get Quotation.

EMIC FM-2000 Multi-function Flux Meter

kvt part2 — Wed, 02 Dec 2020 01:41:51 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: FM-2000

Features

Three types of measurement modes as standard
Control inputs allow for control and automation of measurement operations
RS-232C standard equipment allows measurement data management on a personal computer
Input power supply AC100~240V and wide design can be used without switching

Specifications

Measuring range	0.1mWb, 1mWb, 10mWb (when MILLI WEBER TURNS FULL SCALE 001.0 is set)
Viewing range	0.1μWb~9.999Wb/F.S.・Turns
Measurement Mode	Normal, Peak Hold, Peak to Peak Hold
Measurement accuracy	±1%/F.S.±1digit (when MILLI WEBER TURNS FULL SCALE 001.0 or higher is set)
Drift performance	MULTIPLIER 0.1:±1%/F.S.(30SEC) 1.0:±1%/F.S.(60SEC) 10:±1%/F.S.(60SEC) (TIME UNTIL THE INSTRUCTION CHANGES BY ±1% with a change in magnetic flux of the F.S.) ( MILLI WEBER TURNS FULL SCALE 001.0 or higher)
Hold time	MULTIPLIER 0.1:±1%/F.S.(30SEC) 1.0:±1%/F.S.(60SEC) 10:±1%/F.S.(60SEC) (Time to ±1% change in instruction with F.S. flux change) (MILLI WEBER TURNS FULL SCALE 001.0 or higher)
Output Terminals	DC±1V/F.S. (1.0V when the digital display is 1.000)
Comparator function	1) Judgment input Upper / lower limit setting including polarity +1999~0~-1999 2) Judgment operation about 2 times/second 3) Judgment display ・Hi (red LED): upper limit setting value and indicator value ・Go (green LED) : upper limit setting value≧ indicating value≧ lower limit setting value ・Lo (yellow LED) : indicator value< lower limit setting value 4) Judgment output: Hi/Go/Lo isolated open collector output, sink current: 20mA Max (30V or less), output saturation voltage: 1.2V or less at 20mA,
External Control Input	Optocoupler Isolated Input , Measurement Start Input , Reset Input
RS-232C Communication Speed	9,600bps
power	Single-phase AC100~240V 50/60Hz
Specification Temperature Range	5～40℃
Dimensions (mm) and mass	266W (including handle) ×116H×(370)D Approx. 3.6kg

The post EMIC FM-2000 Multi-function Flux Meter first appeared on Kouei Japan Trading | Get Quotation.

EMIC GM-6006 (3-axis), GM-6001 (1-axis) New Gauss Meter

kvt part2 — Wed, 02 Dec 2020 01:41:28 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: GM-6006 (3-axis), GM-6001 (1-axis)

Features

Equipped with waveform display function
Temperature compensation, touch panel, full remote support
Equipped with auto-calibration function

Specifications

Measuring range	Standard: 4mT, 40mT, 400mT, 4T (4 ranges)
Measurement accuracy	DC: ±0.5% + 0.1% F.S in each range ± Probe Accuracy AC: ±0.5% + 0.1% F.S in each range ± + Probe Accuracy
Number of digits displayed	Up to 5 digits
Measurement frequency	DC: DC only AC: 20Hz~20kHz/-3dB
function	DC measurement (moving average user optional), AC measurement (true RMS conversion), temperature compensation (ON/OFF), waveform display (ON/OFF)
power	AC adapter (12V/2A))
I/o	USB2.0, Ethernet/LAN *Ethernet/LAN: IEEE802.3u, IEEE802.3 compliant OUTPUT(BNC) ±4V F.S
Dimensions and mass	197(W)×151(D)×81(H)mm Approx.1.5Kg *Only the main unit

The post EMIC GM-6006 (3-axis), GM-6001 (1-axis) New Gauss Meter first appeared on Kouei Japan Trading | Get Quotation.

EMIC T-601, T-6G1, A-601, A-6G1, T-603, A6L1 hole probe 6000 series

kvt part2 — Wed, 02 Dec 2020 01:35:15 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: T-601, T-6G1, A-601, A-6G1, T-603, A6L1

Features

Probes are available in single, two, and three axes, and vary in type depending on the purpose of measurement and the direction of the magnetic field.
Choose the right probe for your application.
The sensor has a sensitivity range of 50 μm × 50 μm.
The probe shaft is made of non-metallic materials to eliminate the influence of eddy currents.
If the shaft or sensor is damaged, the probe may not be repaired.
For custom-made requests, please contact us with detailed specifications.
The cable length is 1.5 m.
The probe tip is very fragile, so do not subject it to impact or pressure.
In addition, the probe is only warranted for initial defects at the time of delivery.

The post EMIC T-601, T-6G1, A-601, A-6G1, T-603, A6L1 hole probe 6000 series first appeared on Kouei Japan Trading | Get Quotation.

EMIC VFM-1000 Digital Flux Meter

kvt part2 — Wed, 02 Dec 2020 01:32:19 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: VFM-1000

Features

Measurement is possible even with short tact (2 seconds/1 time) without drift.
Magnetic saturation measuring device, BH analyzer,
It is best used for integration into magnetizing devices, etc.

Specifications

Measuring range	×1, ×10, ×100, ×1000 (4 ranges)
Measuring range	０．０００１ｍＷｂ～９９９９．９ｍＷｂ
indication	5 digits
function	PEAKtoPEAKHOLD, Comparator (Hi, Pass, Lo) RS-232C, External Control (MEAS/RESET)
precision	Each range : ±1% F.S *Body accuracy at constant temperature
DRIFT Performance	Each range : ±1% F.S 60 seconds accuracy is not included
Hold time	Each range : ±1% F.S 60 seconds accuracy is not included
Power Source	９０～２４０V
Exterior dimensions	W258×D324×H103mm (*Excluding protrusions)
mass	Approx. 4kg
accessory	AC Adapter, Control Connector Instruction Manual

The post EMIC VFM-1000 Digital Flux Meter first appeared on Kouei Japan Trading | Get Quotation.

EMIC GMH-201 New Handheld Gausmeter

kvt part2 — Wed, 02 Dec 2020 01:28:06 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: GMH-201

Specifications

name	GMH-201
Measuring range	1 range ±3000mT
Measurement accuracy	DC: ± 2.0% ± 5 digits of reading AC: ±4.0% ±5 digits of reading
Number of digits displayed	6 digits
Measurement frequency	DC/AC：20Hz～400Hz（-3dB ）
function	Auto-zero (DC only), DC/AC measurement, unit conversion Auto Power OFF (User Optional), Peak Hold Function
power	3 AA batteries (alkaline, nickel-metal hydride compatible) ×
Data Communication	Virtual COM port (USB typeC), Bluetooth 5.0 (technical qualification, domestic specification)
Operating temperature	5℃～35℃
Dimensions (mm) and mass	88(W)×145(H)×33(D), 320g (without probe)

The post EMIC GMH-201 New Handheld Gausmeter first appeared on Kouei Japan Trading | Get Quotation.

EMIC T-401, A-301, T-301 Hall Probes Old 4000 Series

kvt part2 — Wed, 02 Dec 2020 01:23:33 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: T-401, A-301, T-301

Specifications

Model		T-401	T-301	A-301
type		Transverse	Transverse	Axial
Element Dimension (mm)		1.8×5.3	1.5×1.7	1.5×1.7
T-Probe Thickness (mm)		1	1	6φ
Probe linearity (less than 1T)		±2%	±3%	±3%
Operating temperature range		-20～70℃	-20～70℃	-20～70℃
Adaptable models	GM-4002	〇	―	―
Adaptable models	GM-301	―	〇	〇
Cable Length (m)		1.9	1.0	1.0

The post EMIC T-401, A-301, T-301 Hall Probes Old 4000 Series first appeared on Kouei Japan Trading | Get Quotation.

EMIC PCM-202 Type Impulse Meter Retrofit Ammeter For Magnetized Power Supply

kvt part2 — Wed, 02 Dec 2020 01:22:19 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: PCM-202

Specifications

Input Power Supply	AC100V 50/60Hz Approx. 2A
Measuring range	0.1～30KA
Current waveform output	6V/F.S (each range)
Repeatability	±0.5%　±1digit
Dimensions (mm)	350W×280D×145H

The post EMIC PCM-202 Type Impulse Meter Retrofit Ammeter For Magnetized Power Supply first appeared on Kouei Japan Trading | Get Quotation.

EMIC CSM type Hall probestandard magnet

kvt part2 — Wed, 02 Dec 2020 01:18:42 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: CSM type

The post EMIC CSM type Hall probestandard magnet first appeared on Kouei Japan Trading | Get Quotation.

EMIC 2 Pole Magnetization Device with 2-pole mount magnetization device

kvt part2 — Wed, 02 Dec 2020 01:16:47 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: 2 Pole Magnetization Device

The post EMIC 2 Pole Magnetization Device with 2-pole mount magnetization device first appeared on Kouei Japan Trading | Get Quotation.

EMIC GT-301 Gauss meter for residual magnetic measurement

kvt part2 — Wed, 02 Dec 2020 01:12:45 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: GT-301

Features

4 digit display
3 Range
Auto-zero function
Peak hold function
DC/AC function
Auto power off function
With polarity display
Probe integrated

Specifications

Measuring range	30mT, 300mT, 3T (3 ranges)
Body Accuracy	DC mode: 30mT range reading± (5%+10dig) 300mT ± of range readings (5%+8dig) of 1000mT range readings ±(5%+5dig) AC mode: 30mT± of range readings (5% + 20dig) ± of 300mT range readings(5%+10dig) ± (5%＋5dig）
indication	4 digits 3,000 count display
Measuring magnetic field frequency	DC/AC (50/60Hz)
function	Auto Zero, Peak Hold, Auto Power Off
Operating temperature	0～40℃
power	1.5V AA Batteries (4pcs)
External dimensions (mm) and mass	77W×140H×27D 300g (Battery Included)
calibration	Pre-Calibration
accessory	4 AA batteries, storage case, instruction manual

The post EMIC GT-301 Gauss meter for residual magnetic measurement first appeared on Kouei Japan Trading | Get Quotation.

EMIC Ultra-multipole magnetizing device rotating linear

kvt part2 — Wed, 02 Dec 2020 01:10:19 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Ultra-multipole magnetizing device rotating linear

Specifications

Input Power Supply	Three-phase AC200V 50/60Hz approx. 60A
Magnetization voltage	0～60V※
Number of magnetic poles	2~9,998 poles
Rotation speed	10～60r.p.m.
Energizing amplitude	1~80% of the extreme width*

The post EMIC Ultra-multipole magnetizing device rotating linear first appeared on Kouei Japan Trading | Get Quotation.

EMIC 12-pole magnetized yoke for large rotors 4-24 Extra-large Rotor Compatible Magnetized Yoke

kvt part2 — Wed, 02 Dec 2020 01:02:38 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: 12-pole magnetized yoke for large rotors

The post EMIC 12-pole magnetized yoke for large rotors 4-24 Extra-large Rotor Compatible Magnetized Yoke first appeared on Kouei Japan Trading | Get Quotation.

EMIC Main 10-Pole FG90 Pole Magnetized Yoke Main/Sensor Compatible Magnetized Yoke

kvt part2 — Tue, 01 Dec 2020 19:48:46 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Main 10-Pole FG90 Pole Magnetized Yoke

The post EMIC Main 10-Pole FG90 Pole Magnetized Yoke Main/Sensor Compatible Magnetized Yoke first appeared on Kouei Japan Trading | Get Quotation.

EMIC Magnetized Yoke for Rotation Sensor Rotation sensor compatible magnetized yoke

kvt part2 — Tue, 01 Dec 2020 19:42:37 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Magnetized Yoke for Rotation Sensor

The post EMIC Magnetized Yoke for Rotation Sensor Rotation sensor compatible magnetized yoke first appeared on Kouei Japan Trading | Get Quotation.

EMIC Magnetic Field Generator Dedicated magnetizing device

kvt part2 — Tue, 01 Dec 2020 19:37:57 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Magnetic Field Generator

The post EMIC Magnetic Field Generator Dedicated magnetizing device first appeared on Kouei Japan Trading | Get Quotation.

EMIC Water-cooled peripheral 4-pole magnetized yoke 4 Extremely small motors compatible with magnetized yoke

kvt part2 — Tue, 01 Dec 2020 19:33:01 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Water-cooled peripheral 4-pole magnetized yoke

The post EMIC Water-cooled peripheral 4-pole magnetized yoke 4 Extremely small motors compatible with magnetized yoke first appeared on Kouei Japan Trading | Get Quotation.

EMIC 8-Pole Skew Magnetized Yoke 4-16 Pole Skew Compatible Magnetized Yoke

kvt part2 — Tue, 01 Dec 2020 19:28:25 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: 8-Pole Skew Magnetized Yoke

The post EMIC 8-Pole Skew Magnetized Yoke 4-16 Pole Skew Compatible Magnetized Yoke first appeared on Kouei Japan Trading | Get Quotation.

EMIC Magnetized Yoke for DD Motor DD motor compatible magnetized yoke

kvt part2 — Tue, 01 Dec 2020 19:20:39 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Magnetized Yoke for DD Motor

The post EMIC Magnetized Yoke for DD Motor DD motor compatible magnetized yoke first appeared on Kouei Japan Trading | Get Quotation.

EMIC Water Cooled Horizontal Magnetized Coil Multi-part magnetization compatible Magnetized coil

kvt part2 — Mon, 30 Nov 2020 19:17:42 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Water Cooled Horizontal Magnetized Coil

The post EMIC Water Cooled Horizontal Magnetized Coil Multi-part magnetization compatible Magnetized coil first appeared on Kouei Japan Trading | Get Quotation.

EMIC Oil-cooled air-core coil High Magnetic Field Compatible Magnetized Coil

kvt part2 — Mon, 05 Oct 2020 01:08:46 +0000

Manufacturer: Electronic Magnetic Industry Co., Ltd.
Model: Oil-cooled air-core coil

The post EMIC Oil-cooled air-core coil High Magnetic Field Compatible Magnetized Coil first appeared on Kouei Japan Trading | Get Quotation.