Products Made in Japan

Manufacturer: Eagle Clamp

Model: CVL Type

• Used materials
  @ Main body · Arm guard · Link · Others: SM 570, SS 400 (or more)
  A arm · nail: SHY 685 N (above)
  B Pin · center shaft and each bolt: SCM 435 (refined steel)
  C pin · bolt · Nut: SCM 435, S 45 C, SS 400

Features

· This machine is designed to hang on a single hook of a crane
· The hinge pin part of this machine has a structure that makes it easy to hang a crane hook
· This machine has a steel structure of secondary machining It is designed to withstand continuous use
· This machine is designed so that the arm is always vertical and has a structure that can hold the load receiving claw part inside the arm guard
· This machine is equipped with a nail part The loading force is transmitted to the instruction link connected to the center of the main link via the vertical arm so that the load is supported by the main body.
· The machine is equipped with two arms that handle transportation by which, the coil placed on two coil size range in a vertical direction which is specified in slings specification by an arm (hole) gripped transported from the inner diameter side, and a mechanism capable of opening and closing of the arms when unloaded.

· The stop position of the “open” and “closed” of arms, by the lock pin has a mechanism that is mechanically locked (holding) of the arm opening operation after the lock pin released, the arm extended for a lever on the side of the body By lowering the mechanism, the operating link connected to the lever vertically descends and each link mechanism connected to the operating link causes the arm to move horizontally horizontally to open the arm.
· The arm is closed. The spring automatically pushes up the actuating link in the vertical direction to return the arm to the “closed” position automatically.
· The structure, the cover, etc. are made to have good maintainability and consideration of safety of operation is.