Eisen, Japan
Eisen CHT-60 Series Carbide Hand Taps For High Hardness Steel (50 to 60HRC)
Made in Japan
Manufacturer: Eisen Co., Ltd.
Model: CHT-60 Series
About the Series
Features
Suitable for machining hardened steel with hardness of 50HRC or more.
The base material is made of ultrafine grain cemented carbide with excellent wear resistance and toughness.
Series Details
| Call | IC 3P | IC 5P | accuracy | L | I | d | Kl | K | F |
|---|---|---|---|---|---|---|---|---|---|
| M2 x 0.4 | 14001 | 14101 | EL3 | 40 | 12 | 3 | Five | 2.5 | 3 |
| M2.3 x 0.4 | 14002 | 14102 | EL3 | 42 | 13 | 3 | Five | 2.5 | Four |
| M2.5 x 0.45 | 14003 | 14103 | EL3 | 44 | 14 | 3 | Five | 2.5 | Four |
| M2.6 x 0.45 | 14004 | 14104 | EL3 | 44 | 14 | 3 | Five | 2.5 | Four |
| M3 x 0.5 | 14005 | 14105 | EL3 | 46 | 11 | Four | 6 | 3.2 | Four |
| M4 x 0.7 | 14006 | 14106 | EL3 | 52 | 13 | Five | 7 | Four | Four |
| M5 x 0.8 | 14007 | 14107 | EL3 | 60 | 16 | 5.5 | 7 | 4.5 | Four |
| M6 x 1.0 | 14008 | 14108 | EL3 | 62 | 19 | 6 | 7 | 4.5 | Five |
| M8 x 1.25 | 14009 | 14109 | EL3 | 70 | twenty two | 6.2 | 8 | Five | Five |
| M8 x 1.0 | 14010 | 14110 | EL3 | 70 | twenty two | 6.2 | 8 | Five | Five |
| M10 x 1.5 | 14011 | 14111 | EL3 | 75 | twenty four | 7 | 8 | 5.5 | Five |
| M10 x 1.25 | 14012 | 14112 | EL3 | 75 | twenty four | 7 | 8 | 5.5 | Five |
| M10× 1.0 | 14013 | 14113 | EL3 | 75 | twenty four | 7 | 8 | 5.5 | Five |
| M12× 1.75 | 14014 | 14114 | EL3 | 82 | 29 | 8.5 | 9 | 6.5 | Five |
| M12 x 1.5 | 14015 | 14115 | EL3 | 82 | 29 | 8.5 | 9 | 6.5 | Five |
| M12 x 1.25 | 14016 | 14116 | EL4 | 82 | 29 | 8.5 | 9 | 6.5 | Five |
| M12 x 1.0 | 14017 | 14117 | EL3 | 82 | 29 | 8.5 | 9 | 6.5 | Five |
| M14 x 2.0 | 14018 | 14118 | EL4 | 88 | 29 | 10.5 | 11 | 8 | 6 |
| M14 x 1.5 | 14019 | 14119 | EL3 | 88 | 29 | 10.5 | 11 | 8 | 6 |
| M16 x 2.0 | 14020 | 14120 | EL4 | 95 | 29 | 12.5 | 13 | Ten | 6 |
| M16 x 1.5 | 14021 | 14121 | EL3 | 95 | 29 | 12.5 | 13 | Ten | 6 |
| M18 x 2.5 | 14022 | 14122 | EL4 | 100 | 35 | 14 | 14 | 11 | 6 |
| M18 x 1.5 | 14023 | 14123 | EL4 | 100 | 35 | 14 | 14 | 11 | 6 |
| M20 x 2.5 | 14024 | 14124 | EL4 | 105 | 35 | 15 | 15 | 12 | 6 |
| M20 x 1.5 | 14025 | 14125 | EL4 | 105 | 35 | 15 | 15 | 12 | 6 |
Related Products
-
Kanetec KMDTR Tunnel Type Demagnetizer
-
Yutani HPW-6SD Impact Driver
-
SENSEZ HRV.HRI Compact Pressure Sensors for Medium and High Pressure
-
Nakatani Kikai NG75L(K)-CR Die Grinder (NG75L Light Type)
-
SAKUSAKU SDH101262 Blade for Cut-off And Deep Grooving Height 26 / Maximum Cut-off Diameter φ50 / Applicable Insert Width 1.85-2.5
-
Kanetec HMC MAGHAND™
REQUEST QUOTATION
PAYMENT
LINK
