ENDO KOGYO, Lifting
Endo Kogyo EHL-TS Series Chain Air Hoist
Product Made in Japan
Manufacturer: ENDO KOGYO
Model: EHL-TS Series
EHL-TS rated load between 250 and 3,000 kg
Mainfunction of EHL-TS Series
This type of Air Hoist is equipped with a surface-hardened load chain that is made of alloy steel and has excellent toughness and wear resistance.
The load chain is extendable.
The pull cord is used for the lift control as standard.
For the button-type control, the pendant switch must be purchased.
Note: Type EHL-3TS is only available outside Japan. Therefore, it cannot be used in Japan.
Specification of EHL-TS Series
| Model | Rated load (kg) | Stroke (m) | Air pressure (MPa) (kgf/c㎡) | Lifting speed (m/min) | Air consumption (m³/min) (normal) | Link chain (Dia. x No. of falls) | Air inlet | Mass (kg) |
| EHL-025TS | 250 | 3 | 0.4(4) | 12.0 | 0.9 | 6.3×1 | Rp 1/2 | 18.7 |
| 0.5(5) | 16.0 | 1.3 | ||||||
| 0.6(6) | 18.0 | 1.6 | ||||||
| EHL-049TS EHL-05TS | 490 500 | 3 | 0.4(4) | 7.5 | 0.95 | 6.3×1 | Rp 1/2 | 18.7 |
| 0.5(5) | 9.0 | 1.3 | ||||||
| 0.6(6) | 10.5 | 1.65 | ||||||
| EHL-1TS | 1,000 | 3 | 0.4(4) | 4.0 | 1.0 | 7.1×1 | Rp 1/2 | 34.0 |
| 0.5(5) | 5.2 | 1.4 | ||||||
| 0.6(6) | 6.0 | 1.8 | ||||||
| EHL-2.8TS | 2,800 | 3 | 0.4(4) | 2.0 | 1.75 | 12.5×1 | Rp 3/4 | 75.0 |
| 0.5(5) | 2.6 | 2.47 | ||||||
| 0.6(6) | 3.0 | 3.14 | ||||||
| EHL-3TS | 3,000 | 3 | 0.4(4) | 2.0 | 1.75 | 12.5×1 | Rp 3/4 | 75.0 |
| 0.5(5) | 2.6 | 2.47 | ||||||
| 0.6(6) | 3.0 | 3.14 |
- Accessories of EHL-TS
-Plain Trolley
When attached to a beam, this trolley enables smooth horizontal movement by hand.
-Air Motor Trolley
This type of trolley is powered by air and transports a suspended load horizontally. You can also combine this trolley with an Air Hoist for use as a crane.
Kouei is Distributor/Agent of Endo Kogyo.
Other items of Endo Kogyo
Request the quotation for Endo Kogyo
Related Products
-
ELEPHANT (Zojirushi) Plain Trolley (Collar type)
-
Jung JKB Series Revolving Transport Trolleys
-
Eagle Clamp PE/PER Type Pile Pulling Clamp
-
Japan Clamp HSMY / HSMY-S Clamp For Horizontal Suspension
-
Kondotec D Type Form Tie (W1/2 Nut is separated)
-
Eagle Jack (Konno Corporation) GU-200 Hydraulic Claw Jack
