,

EXEN CKCA Cordless Vibrator

Products Made In Japan
Manufacturer: EXEN
Model: CKCA

A powerful cordless vibrator with a large-capacity 18 V, 4.0 Ah lithium-ion battery

This product is used for the following applications:

  • Concrete pouring in general
  • Manufacturing of test pieces

Features

The cordless vibrator is a handheld, convenient vibrator applicable to both indoor and outdoor worksites without commercial power.
The unit is powered by a large-capacity 18 V, 4 Ah lithium-ion cell, which enables concrete to be poured with more powerful vibration than with our conventional CV series models.
Models are available in a wide variety, including electrode types, flexible types, and wall-concreting types.
Among the main uses of the product are the compaction of concrete in residential foundations, small secondary concrete products, test pieces, stone masonry, retaining walls, and the concreting of walls in architectural molds of buildings, thereby ensuring a wide range of applications.
The models made available are electrode types (C25DS, C28D, and C28DL), flexible types (C28F, 0.6 m), and wall-concreting types (CKCA and CPS) — six models in total. All these have been provided to allow you to use them according to your particular needs in concreting.
Cordless tamper (C28DTK): This is a handheld cordless compaction tamper.
Best suited for compaction, such as backfilling of sand and gravel in cramped areas.

Using a large-capacity battery

The cordless vibrator C series are powered by a large-capacity 18 V, 4 Ah lithium-ion cell.
Lithium-ion cells are large-capacity batteries higher in voltage, higher in energy density, and larger in capacity than nickel-cadmium cells and nickel hydrogen cells
Moreover, these cells discharge less of its energy and can be recharged before they become low.

Cordless vibrator C series

User-friendly cordless type

One advantage of cordless vibrators is that they need no power cords; while using them, you do not have to mind how long the cord is or where the outlet is.
You will therefore no longer be bothered by interfering cords on worksites far away from commercial power or in cramped areas.

A rich lineup of models suited for particular worksite environments

Electrode types: C25DS, C28D, C28DL
These models are suited for worksites with many rebars in them and allow workers to insert the unit vertically into a target point in a deep layer of soil and then pour concrete in there. They therefore ensure a highly strong finish of concrete.
Model values represent the outer diameters of the vibrators.
For the lengths of the vibrating units, see the table of specifications.
Flexible type: C28F (0.6 m)
The flexible vibrator has its vibrating unit extended with flexible hose to transmit revolution through its flexible shaft.
You can use the unit not only at the worker’s feet but in a wide range thanks to 0.6 meters of flexible hose.
Connected by a rubber flexible hose, the unit can be used in places where the hose may bend somewhat during concreting.
Wall-concreting types: CKCA and CPS
This vibrator is used in concreting and surface finish by transmitting vibration from outside a mold.
Able to move flexibly in cramped corners and with higher work efficiency, the unit is best suited for worksites on a poorly-conditioned ground.
The CKCA is a type that is pressed against a mold, vibrating it from outside.
The CPS is a type to be inserted into a single cylinder pipe or mold retainer.

Cordless vibrator C series

From the top; C25DS, C28D, C28DL, C28F (0.6m), CKCA, CPS

High vibration (up 20% from our earlier models)

A large-capacity 18 V, 4 Ah lithium-ion cell is used to increase vibration about 20% from that of earlier models of the CV series (nickel-cadmium 14.4 V).
With vibration increased, the unit can be used comfortably on worksites that need higher vibration than they obtained before.

Equipped standard with a spare battery

Spare batteries were popular in our earlier models. The present model therefore comes with one spare cell with a charger. Housed in a carrying case, the unit is best suited for carrying around and storage on worksites.

Cordless vibrator C series

Best suited for residential foundations and test pieces

Cordless vibrators are user-friendly and best suited for pouring concrete in residential foundations.
Reinforced concrete foundations can be handled with a flexible type C28F, and riser foundations with many rebars in them are managed with electrode type C28D, C28L, or other, to realize strong concrete foundations.
Concreting in test pieces on worksites can be conveniently conducted by long C25DSs.

The vibrating body is easy to replace

For electrode types and wall-concreting types, their four bolts can be removed from the motor on the rubber damper flange before replacement.
The vibrating body can be replaced. If any part of the product becomes worn, it can be easily replaced.
The motor type is common to all models of cordless vibrators.

For flexible types, you have only to loosen their hose gland (the right screw) before you can easily replace the vibrator assembly.

Cordless vibrator C series

Excellent characteristics for preventing vibration at hand

Electrode types and wall-concreting types with rubber flanges in them are equipped with excellent vibration protection performance, which makes these vibrators easy on your hands.

Cordless vibrator C series

User-friendly cordless compaction tamper

Best suited for backfilling sand and gravel in burying city water and drainage pipes and burying communications cable conduits on worksites without commercial power.

Specification

C series

Model   Power supply Battery 1 per
operating time
(min)
Frequency
(Hz)
Total length
(mm)
Head length
(dia.×Length)
(mm)
Flexible/
Vibe Assen length
(mm)
Weight
(kg)
Flexible/
Vibe Assen
Item code
C25DS Battery
B1840
DC18V/ 4.0Ah
30 200 767 φ25X447 522 4.1 101488000
C28D 25 795 φ28X475 550 4.2 100677100
C28DL 25 955 φ28X635 710 5.0 101482000
C28F (0.6m) 20 1089 φ28X186 824 4.2 101452000
C28DTK 25 809 Vibrating portion (diameter X length)
φ28X489
Vibration plate (width X length)
42X190
564 4.4 101548000
CPS 20~25 515 Vibrating portion(width X length)
80X190
270 4.5 101490000
CKCA 20 125 415 Vibrating face (width X length)
76X113
169.5 3.9 101486000
With holder 418 120X150 5.0

(Imperial System)

Model   Power supply Battery 1 per
operating time
(min)
Frequency
(Hz)
Total length
(ft)
Head length
(dia.×Length)
(in)
Flexible/
Vibe Assen length
(in)
Weight
(lb)
Flexible/
Vibe Assen
Item code
C25DS Battery
B1840
DC18V/ 4.0Ah
30 200 ‘2’5″ φ1.0X17.6 20.6 9.0 101488000
C28D 25 ‘2’6″ φ1 1/16X18.7 21.7 9.3 100677100
C28DL 25 ‘3’1″ φ1 1/16X25.0 28.0 11.0 101482000
C28F (23.6 (in)) 20 ‘3’6″ φ1 1/16X7.3 32.4 9.3 101452000
C28DTK 25 ‘2’7″ Vibrating portion
(diameter X length)
φ1 1/16X19.3
Vibration plate
(width X length)
1.7X7.5
22.2 9.7 101548000
CPS 20~25 ‘1’7″ Vibrating portion
(width X length)
3.1X7.5
10.6 9.9 101490000
CKCA 20 125 ‘1’4″ Vibrating face
(width X length)
3.0X4.4
6.7 8.6 101486000
With holder ‘1’4″ 4.7X5.9 11.0

*The following are times during which the models were checked for operation according to our standards.
*These are weights including that of a battery (0.8 kg).
*The holder is optional.

Dimensions, installation, control panel

Product dimensional drawings

Product dimensional table

Model Total length
(mm)
Vibrating face
(width×Length)
(mm)
Head length
(dia.×Length)
(mm)
Vibe Assen length
(mm)
CPS 515 80X190 270
CKCA 415 76X113 169.5
With holder 418 120X150

(Imperial System)

Model Total length
(ft)
Vibrating face
(width×Length)
(in)
Head length
(dia.×Length)
(in)
Vibe Assen length
(in)
CPS ‘1’7″ 3.1X7.5 10.6
CKCA ‘1’4″ 3.0X4.4 6.7
With holder ‘1’4″ 4.7X5.9

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top