,

EXEN E28FPA Baby Flexible Vibrator

Products Made In Japan
Manufacturer: EXEN
Model: E28FPA

Aluminum die-cast double-insulated, double-damped safe vibrator

This product is used for the following applications:

  • Concrete placement in general
  • Test piece manufacturing
  • Features

    The baby flexible vibrator is small and lightweight. Unlike the electrode type, the motor is connected to the vibrating unit by a rubber flexible hose. Even if the hose is bent somewhat during concreting, it can still remain useful. This flexible concrete vibrator (inner vibrator) can be used in a wide range of applications, including mainly residential foundation works, manufacturing of secondary products and test pieces, masonry, and the construction of retaining walls.
    This handy vibrator is easy to use on a wide range of worksites because it employs a robust aluminum die-cast double-insulated sealed motor, is lightweight, and comes in a wide range of models.

    Lightweight and very easy to operate

    Lightweight baby flexible vibrators weigh about 5 to 8 kilograms on a standard basis. They are also capable of moving flexibly from place to place, resulting in user-friendliness. Also various are hose lengths and vibrating unit diameters. You can use them to meet your particular worksite environments, resulting in high ease of operation.

    Concreting is possible in deep locations as well

    Handy baby flexible vibrators are equipped standard with flexible hoses 0.6, 1.0, 1.5, and 2.0 m. Hose lengths can be selected according to the particular concreting condition on a specific worksite, resulting in convenient use. The motor, on the other hand, can be shared among different models, which makes it possible to replace parts of different lengths.

    The motor case is made of robust die-cast aluminum

    The handy held vibrator series of motor cases are made of lightweight, strong die-cast aluminum. Robustly designed to meet the particular worksite operating conditions, these vibrators can be used with peace of mind.

    Baby flexible vibrator

    The vibrating unit is easy to replace

    When the vibrating body or flexible hose gets worn, you can replace it easily. To replace it, you have only to loosen the hose gland (right-hand screw) that fastens the vibrating body flexible hose to the motor, and remove the screws (right-hand screws) of the flexible shaft and motor.
    (In installing or detaching the hose gland, hammer it lightly.)

    Baby flexible vibrator

    A double-insulated structure requiring no grounding

    The handy held series of motor cases are safe, user-friendly motors with a robust die-cast aluminum body having a double-insulated structure requiring no grounding. The armature shaft is insulated from the winding core by using resin, and the motor case is insulated from the field core by using resin, thereby ensuring double insulation. That insulation is further reinforced by a resin cover on the inner lead wires.

    Baby flexible vibrator

    Concrete adherents are easy to remove

    On worksites with handy held vibrators, concrete mortar adherents close up much of the air suction and exhaust ports of the motor. Removal of hardened mortar is also hard to perform. The suction port cover and bearing case are therefore coated with fluororesin to enable the concrete to be easily cleaned, resulting in higher maintainability.

    Baby flexible vibrator

    A motor handle with a double-damped structure

    E motors employed in the handy held vibrator series are each equipped with four small rubber dampers on the handheld handle and the motor frame. The result is that the handy baby flexible series are attenuated in vibration in the flexible hose, while the handy hard shaft, handy punch, handy scraper, handy wall-concreting, and handy tamper series are of a double-damped structure together with the rubber dampers on the motor and the vibrating unit mounts. These are therefore designed to be easy on the workers’ hands.

    Baby flexible vibrator

    Control on motor exhaust sound

    The handy held vibrator series of vibrators control motor noise, thereby being easy on the worksite environment. The exhaust sound from the cooling fin of the series of motors running fast is controlled as far as possible by specially shaping the cooling fin and exhaust port.
    (5 dB down from our earlier models)

    Baby flexible vibrator

    The motor suction port equipped with a dustproof filter

    On worksites with handy held vibrators in severe dusty operating environments, it is also much feared that some fine aggregate from the dry concrete mortar may go into the motor. The suction port of the motor is therefore equipped with a dual filter. The filter is employed to minimize the incidence of the motor from accidentally being locked in revolution due to the ingress of small pebbles or something similar.

    Baby flexible vibrator

    A shutoff brush employed

    The motor is equipped with a shutoff brush to protect against burns.
    The motor is prevented from burns by employing a structure that stops the motor by shutting down the power before the brush completely reaches its wear limit in order to prevent imperfect contact with the armature and scratches in the commutator due to brush wear.

    Specification

    E-FP

    Model Shaft length(m) Output (W) Input (V) Input (A) Frequency (Hz) Total length (mm) Head (dia.×Length)(mm) Length Hose/shaft Assembly(mm) Weight (kg)
    E23F 0.4 280 100 5.0 220~280 1,089 φ23×336 820 5.0
    0.8 1,489 1,235 5.5
    1.3 1,989 1,735 6.3
    1.8 2,489 2,235 7.1
    E28FPA 0.6 220~270 1,129 φ28×207 875 5.0
    1.0 1,529 1,275 5.6
    1.5 2,029 1,775 6.4
    2.0 2,529 2,275 7.2
    E32FPA 0.6 210~270 1,109 φ32×187 825 5.2
    1.0 1,509 1,229 5.9
    1.5 2,009 1,729 6.7
    2.0 2,509 2,229 7.4
    E38FPA 0.6 1,112 φ38×190 825 5.6
    1.0 1,512 1,229 6.2
    1.5 2,012 1,729 7.0
    2.0 2,512 2,229 7.8

    ※Product masses include that of the mold cord (0.6kg).
    ※Because this product is a built-to-order product, contact EXEN for information of delivery time.

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model Shaft length(m) Total length
    (mm)
    Head Length Hose/shaft Assembly(mm)
    (dia.×lenght)
    (mm)
    E23F 0.4 1089 φ23×336 820
    0.8 1489 1235
    1.3 1989 1735
    1.8 2489 2235
    E28FPA 0.6 1129 φ28×207 875
    1.0 1529 1275
    1.5 2029 1775
    2.0 2529 2275
    E32FPA 0.6 1109 φ32×187 855
    1.0 1509 1255
    1.5 2009 1755
    2.0 2509 2255
    E38FPA 0.6 1112 φ38×190 858
    1.0 1512 1258
    1.5 2012 1758
    2.0 2512 2258

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top