,

EXEN E32DPS Handy Held Punch Vibrator (Surface Finish)

Products Made In Japan
Manufacturer: EXEN
Model: E32DPS

Made of die-cast aluminum, this vibration is safe with double insulation and double damping. Suited for removing air bubbles from slope faces where air bubbles are stubborn, and for surface finishes.

This product is used for the following applications:

  • Concrete placement in general
  • Features

    The handy held punch vibrator is a small, powerful concrete vibrator consisting of a vibrating unit connected directly to a motor. The powerful vibration of the vibrating body is transmitted to the vibration plate, so that the machine effectively defoams and surface-finishes slope faces where air bubbles are stubborn. The machine is particularly suited for pouring concrete into soil-retaining plates for secondary concrete products, shelf plates, U-shaped ditches, revetments, and the slope faces of civil engineering structures, and a wide range of other surfaces. Equipped with a robust double-insulated sealed motor made of die-cast aluminum, the handy held vibrator is lightweight and user-friendly.

    Best suited for pouring concrete into thin products of narrow molds and into slope faces

    This is for removing air bubbles from slope faces with stubborn air bubbles. Vibration from the punch plate gathers air bubbles and pulls them up together with the plate, thereby ensuring neat surface finishes.

    Lightweight and very easy to operate

    The handy punches weigh about 8kg and are lightweight and user-friendly on a standard basis. They vary greatly in length and diameter. Because of their offerings that can be used according to different work environments, they prove to be very easily operable.

    The motor case is made of robust die-cast aluminum

    The handy held vibrator series of motor cases are made of lightweight, strong die-cast aluminum. Robustly designed to meet the particular worksite operating conditions, these vibrators can be used with peace of mind.

    Handy held punch vibrator (Surface finish)

    The vibrating unit is easy to replace

    If the vibrating body is worn, it is easy to replace. To replace it, you have only to detach the four bolts fastening the rubber damper of the vibrating body on the motor.

    Handy held punch vibrator (Surface finish)

    A double-insulated structure requiring no grounding

    The handy held series of motor cases are safe, user-friendly motors with a robust die-cast aluminum body having a double-insulated structure requiring no grounding. The armature shaft is insulated from the winding core by using resin, and the motor case is insulated from the field core by using resin, thereby ensuring double insulation. That insulation is further reinforced by a resin cover on the inner lead wires.

    Handy held punch vibrator (Surface finish)

    Concrete adherents are easy to remove

    On worksites with handy held vibrators, concrete mortar adherents close up much of the air suction and exhaust ports of the motor. Removal of hardened mortar is also hard to perform. The suction port cover and bearing case are therefore coated with fluororesin to enable the concrete to be easily cleaned, resulting in higher maintainability.

    Handy held punch vibrator (Surface finish)

    The photo shows a baby flexible type.

    Excellent rubber characteristics

    Handy hard shaft, handy punches, handy scrapers, handy wall concreting, and handy tamper series are equipped with rubber dampers having damping performance that meets the particular uses. This makes this series of vibrators easy on the worker’s hands and user-friendly.

    Handy held punch vibrator (Surface finish)

    A motor handle with a double-damped structure

    E motors employed in the handy held vibrator series are each equipped with four small rubber dampers on the handheld handle and the motor frame. The result is that the handy baby flexible series are attenuated in vibration in the flexible hose, while the handy hard shaft, handy punch, handy scraper, handy wall-concreting, and handy tamper series are of a double-damped structure together with the rubber dampers on the motor and the vibrating unit mounts. These are therefore designed to be easy on the workers’ hands.

    Handy held punch vibrator (Surface finish)

    Control on motor exhaust sound

    The handy held vibrator series of vibrators control motor noise, thereby being easy on the worksite environment. The exhaust sound from the cooling fin of the series of motors running fast is controlled as far as possible by specially shaping the cooling fin and exhaust port. (5 dB down from our earlier models)

    Handy held punch vibrator (Surface finish)

    The motor suction port equipped with a dustproof filter

    On worksites with handy held vibrators in severe dusty operating environments, it is also much feared that some fine aggregate from the dry concrete mortar may go into the motor. The suction port of the motor is therefore equipped with a dual filter. The filter is employed to minimize the incidence of the motor from accidentally being locked in revolution due to the ingress of small pebbles or something similar.

    Handy held punch vibrator (Surface finish)

    A shutoff brush employed

    The motor is equipped with a shutoff brush to protect against burns. The motor is prevented from burns by employing a structure that stops the motor by shutting down the power before the brush completely reaches its wear limit in order to prevent imperfect contact with the armature and scratches in the commutator due to brush wear.

    List of models

    Model Code
    E32DP 000716000
    E32DPS 000717000

    Specification

    E-DP

    Model Output
    (W)
    Input
    (V)
    Input
    (A)
    Frequency
    (Hz)
    Total length
    (mm)
    Head
    (dia.×length)
    (mm)
    Shaft length
    (mm)
    Weight
    (kg)
    E32DP 280 100 5.0 225-275 1138 300X400 829 7.5
    E32DPS 205-280 1739 120X1219 1430 7.8

    (Imperial System)

    Model Output
    (W)
    Input
    (V)
    Input
    (A)
    Frequency
    (Hz)
    Total length
    (ft)
    Head
    (dia.×length)
    (in×ft)
    Shaft length
    (ft)
    Weight
    (lb)
    E32DP 280 100 5.0 225-275 3’9″ 11.81X1’4″ 2’9″ 16.5
    E32DPS 205-280 5’8″ 4.7X4’0″ 4’8″ 17.2

    ※All models single-phase 200V specification also production.

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model Total length
    (ft)
    Head
    (dia.×lenght)
    (in×ft)
    Shaft length
    (ft)
    E32DP 1138 300X400 829
    E32DPS 1739 120X1219 1430

    (Imperial System)

    Model Total length
    (ft)
    Head
    (dia.×lenght)
    (in×ft)
    Shaft length
    (ft)
    E32DP 3’9″ 11.81X1’4″ 2’9″
    E32DPS 5’8″ 4.72X4’0″ 4’8″

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top