Japan, Kanetec
Kanetec NH-P Magnetic Type Nozzle Holder
Product Made in Japan
Manufacturer: Kanetec
Model: NH-P
Application
- This holder is designed for holding a nozzle(s) at the end of cutting oil hose on machine tools. This can also be used to remove by injecting cutting liquid chips and particles produced during electric discharging.
[Features]
Strong holding power enables the holder to be installed at any position.
A flexible hose enables the nozzle tip to be positioned at any position and angle.
The employment of a cock allows flowrate adjustment.
The adjustable hose can be adjusted in length by removing or adding joints.
[mm(in)]
Model | Holding Power | Nominal Size | Inlet Dia. | Hose Length | No. of Outlets | Mass |
NH-P1 | 245N(25kgf) | φ70(2.75) ×27(1.06) |
φ9(0.35)
|
390(15.3) | 1 pc | 0.95kg/2.1 lb |
NH-P3 | 490N(50kgf) | 48(1.89) ×73(2.87) ×54(2.12) | 420(16.5) | 3pcs | 1.65kg/3.6 lb |
NH-P3
NH-P1
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
Fujii Denko 16D-100 Rope Adjuster (Adjusting Implement)
-
Ross Asia 27 series In-line poppet valve
-
TONE CLR-308 Clip Remover
-
Organo Fluorine Recovery System Using Ecocrysta Crystallization Technology
-
KITAGAWA RK201 NC Rotary Table
-
Chiyoda Seiki RsC-3/RsC-3D Large Flow/piston/diaphragm Pressure Regulator (primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 2300 m3/h・Air)