Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp PD-12 Portable Dryer

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: PD-12
Features
Auto-cooling operation function (New equipment) Digital temp. display
features a digital air volume display (%), an input-output service terminal (an industry first!), and a temperature alarm output function. It also comes with an inlet filter, overheat prevention sensor, and built-in temperature fuse.
You can install the unit at any angle using the handle. It will also stop automatically after cooling if you turn off the operation switch while it’s operating in a downward position, thanks to its auto-cooling feature based on the inside temperature when the operation stops.
Specification
Model | PD-12 | ||||
Type | PD1100-1.4 | PD1200-2.5 | PD1230-2.5 | PD1200-3.2 | PD1230-3.2 |
Power | Single-phase 100V | Single-phase 200V | Single- phase 230V | Single-phase 200V | Single-phase 230V |
Heater capacity | 1400W | 2500W | 3200W | ||
Auto-temp. control range | Normal temp. – 650゚C * When the discharge angle is more downward than level, Normal temp. – 450゚C | ||||
Accessories | Flange adapter PDF65, Discharge nozzle PDN70 | ||||
Max. air volume | 520L/min | 450L/min | |||
Max. static pressure | 0.44kPa | ||||
Power cord | 2-core * 2mm2 * 4m | 3-core : 2m2 : 4m | |||
Soft cable (High flexible type) | |||||
Weight | 2.4㎏ | 2.6㎏ |
Related Products
-
Kokosha Sunlight Adjustment Film Solar Guard
-
Tsugaru Kogyo No.4009 48 Drive-in Cap End
-
Seiwa E04SR130525AB Ferrite Core Split Cores SR, SRM and SRS Types EMC Products
-
SANKO ELECTRONIC LABORATORY TRC-250A Pinhole And Holiday Detectors
-
Japan Life D-Lift Anchor (D-Lift Anchor Series)
-
Fujii Denko T-41 Subsidiary Lanyard For Pole Safety Belt