Japan, Kansai
KANSAI Sling Hook
Product Made in Japan
Manufacturer: Kansai
Sling Hook
Features
Even if a high-strength sling belt woven with Technolar is hung directly on this hook, it has a curve that will not damage the belt.It is lightweight and has a high strength with a safety factor of 5 times the working load before deformation. Since it is a swivel type with a return function, it is possible to swing at a delicate angle. This is PAT’s original.
To install, remove the roll pin, pass the shackle through the can, then install the nut and drive the roll pin. There are 5 ton type and 12.5 ton type with specified load.
Dimension table (unit = m/m)
Size (Nominal) |
Working Load (KN) |
A Maximum Belt Width |
B 1 Without Spring |
B With 2 Springs | C | D | E | d | Reference Weight (kg) |
---|---|---|---|---|---|---|---|---|---|
5t | (49.0) | 75 | 52 | 42 | 327 | 41 | 246 | 27 | 8.4 |
12.5t | (122.5) | 100 | 75 | 61 | 425 | 48 | 318 | 32 | 19.1 |
*You can choose between blue or yellow paint.
Related Products
-
Yutani NRM motor, YM motor, AWA winch Air Motors And Air Winches
-
MIKI NETSUREN CU-X Concrete Block Clamp
-
Vessel No.B-340TX Wood-Compo TORX Screwdriver
-
JTEKT KF Series Drive Shaft For Steel Production/ Industrial Equipment
-
Fujii Denko R-514-GC (G-cut) Harness & Lanyard
-
Chiyoda Seiki BHN-4PM Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)