Japan, Kikusui Tape
Kikusui Tape 183 Double-Coated Glue Tape
Made in Japan
Manufacturer: Kikusui Tape
Model: 183
Double-coated adhesive tape using suf cloth as base material, which is strong and has good adhesion to rough surfaces.
Features / Applications of Model 183
For fixing rubber printing plates.
Description of Model 183
- Double-coated adhesive tape with strong and easy to peel off due to the use of suf cloth as the base material.
- The tape has excellent adhesion to rough surfaces due to its thickness.
Structure
- Release paper
- Rubber glue
- Souffle Cloth
- Rubber-based glue
Performance
Thickness (mm) | 0.250 |
---|---|
Adhesive strength (N/10mm) | 5.50 |
Shear adhesive strength (23°C) (N/(25mm)²) | 40 |
Shear adhesive strength (60°C) (N/(25mm)²) | 13 |
This characteristic value is an example measured by an in-house test method and is not a guaranteed value.
List of standard sizes and case quantities
Please check with the distributor’s office or staff for availability.
Precautions for use
- Do not use it for electrical insulation.
- Wipe off dust, oil, moisture, etc. on the surface to be affixed.
- Please apply the tape by pressing down firmly.
- Depending on the type of adherend and conditions of use, the tape may not perform as intended.
- The release paper used in the tape may slip and fall if left on the floor.
- Do not apply directly to the human body (skin). It may cause a rash.
- When storing the tape, keep it in a cool place out of direct sunlight.
Kouei is Distributor/Agent of Kikusui
Other items of Kikusui
Request the quotation for Kikusui
Related Products
-
H.H.H Drum Upper DUS-1 (nickname: Doraage-kun)
-
TONE EX413 Wobble Extension Bar Set
-
Fujii Denko FL-10 Ring & Buckle
-
Chiyoda Seiki MGS-200 Medium Flow Rate, Self-powered Pressure Regulator/Large Flow Rate, Pilot Type Pressure Regulator (primary pressure: 1.0 MPa or less/adjustment pressure 0.01 to 0.1 MPa, standard flow rate: 300 m3/h・Air)
-
UNIKA Anchor Series Individual Resale
-
Kyowa U-25 S32-7 – 6-core shield tip exposed Cable