Japan, Kikusui Tape
Kikusui Tape 1922PC Double-Coated Glue Tape
Made in Japan
Manufacturer: Kikusui Tape
Model: 1922PC
Double-coated adhesive tape with a thickness of 0.025 mm to prevent step marks at the application point
Features / Applications
- Splicing of film sheets.
- Fixing of film sheet to winding core (core start).
Description of Model 1922PC
- With a thickness of 0.025mm, this double-coated adhesive tape is extremely thin, making it difficult to create step marks at the point of application.
- Polyester film is used as the base material.
- The adhesive is colored green to make it easy to see where the tape has been applied.
*As with other double-coated adhesive tapes, it can also be manufactured in paper tubes.
Structure of Model 1922PC
- Release paper
- Acrylic glue
- Polyester film
- Acrylic glue
Performance
Thickness (mm) | 0.025 |
---|---|
Adhesive strength (N/10mm) | 1.90 |
Shear adhesive strength (60°C) (N/(25mm)²) | 75 |
This characteristic value is an example measured by an in-house test method and is not a guaranteed value.
List of standard sizes and case quantities
Please check with the distributor’s office or staff for availability.
Precautions for use
- Do not use for electrical insulation.
- Wipe off dust, oil, moisture, etc. on the surface to be affixed.
- Please apply the tape by pressing down firmly.
- Depending on the type of adherend and conditions of use, the tape may not perform as intended.
- The release paper used in the tape may slip and fall if left on the floor.
- Do not apply directly to the human body (skin). It may cause a rash.
- When storing the tape, keep it in a cool place out of direct sunlight.
Kouei is Distributor/Agent of Kikusui
Other items of Kikusui
Request the quotation for Kikusui
Related Products
-
Sekisui Chemical JIS Standard VP Pipe
-
Tokyo Keiso TF-4150, TF-4160, TF-4170 High Flow Rate Measurement, Light Aluminum Body
-
Saitama Seiki U-TOOL U-220 Through Ratchet Wrench
-
UHT Corporation CS70-6 #1200 Pink Ceramic Stones
-
Chiyoda Seiki MBO-25/MBN-25 Anesthesia Pressure Regulator For Oxygen And For Laughing Gas (primary pressure: 15.0 MPa or less/set pressure 0.4 MPa, standard flow rate: 25 ℓ/min)
-
Taisan LP8W Electromagnetic Pumps For Water: Flow Type