KITAGAWA TR Series NC Rotary Table

Made in Japan

Manufacturer: Kitagawa

Model: TR Series

Feature:

High performance range for machining large work pieces

High rigidity for heavy cutting

Hydraulic clamping method

High accuracy

Air-hydraulic booster provides high clamping torque. (TRX and TLX)

Rotary joint available

Large through-hole

Rotary scale can be fitted to further increase accuracy

*CE correspondence

Model		TLX250	TRX320(TLX)	TR400(TL)
Right-handed Type		×	○	○
Left-handed Type		○	○	○
Table Diameter (mm)		ø250	ø320	ø400
Centre Hole Diameter (mm)		ø105H7	ø135H7	ø180H7
Through Hole Diameter (mm)		ø78	ø110	ø150
Centre Height (mm)		180	225	255
Clamping Method		Air-Hydraulic / Hydraulic	Air-Hydraulic / Hydraulic	Air-Hydraulic / Hydraulic
Clamping Torque (N・m) (at pneumatic TRX-0.5MPa, TR-0.45MPa, hydraulic 3.5MPa)		1100	2600	2500
Motor Axis Reduced Inertia (kg・m²)		0.00073	0.00085	0.0028
Servomotor (for Fanuc spec.)		αiF 4/5000-B	αiF 8/3000-B	αiF 12/4000-B
Total Reduction Ratio	4th axis spec. (Fanuc spec.)	1/90	1/120	1/180
Total Reduction Ratio	M signal spec.	1/90	1/180	1/180
Max. Rotation Speed (min^-1)	4th axis spec. (Fanuc spec.)	33.3 (at motor 3000min^-1)	25 (at motor 3000min^-1)	11.1 (at motor 2000min^-1)
Max. Rotation Speed (min^-1)	M signal spec.	33.3 (at motor 3000min^-1)	16.6 (at motor 3000min^-1)	11.1 (at motor 2000min^-1)
Allowable Work Inertia (kg・m²)		1.95	4.48	10.00
Indexing Accuracy (sec)		20	20	20
Repeatability (sec)		4	4	4
Mass of Product (kg)		142	181	350
Allowable Load	Horizontal (kg)	250	350	500
Allowable Load	Vertical (kg)	125	180	250
Manual Tailstock （Option）		TS250RN	TS320RN	TS400RN
Tail Spindle （Option）		MSR181A/TSR181A TSR181H	TSR181A45 TSR181H45	Order Production
Rotary Joint （Option）		RJ70H25D05 Hydraulix / Pneumatic 6 ports	RJ70H32K02 Hydraulix / Pneumatic 6 ports	Order Production